Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > FMA/Revolectrix Product Support


FMA/Revolectrix Product Support FMA/Revolectrix Factory Product Support


Reply
 
Thread Tools Display Modes
Old 12-17-2016, 10:12 PM   #1
lmcwilli
Registered Users
 
Posts: 501
 

Join Date: Sep 2011
Location: US,Maryland,Frederick
Default How to BUMP a 4.27V Revolectrix pack?

I have three Revolectrix Silver Label 70C HV5500 6S packs. The recommended charge voltage is 4.27V/cell.

The BUMP only allows setting up to 4.25V as the max volts/cell. Can I achieve a 4.27V setting using the BUMP?
__________________
Blade 450X, Witespy Quad, Gaui X3, Gaui X5, Goblin 570, Goblin Black Thunder

Last edited by lmcwilli; 12-18-2016 at 08:29 AM..
lmcwilli is offline        Reply With Quote
Old 12-17-2016, 11:53 PM   #2
RevoKelly
Registered Users
 

Join Date: Sep 2015
Location: USA
Default

Quote:
Originally Posted by lmcwilli View Post
I have three Revolectrix Silver Label 70C HV5500 6S packs. The recommended charge voltage is 4.27V/cell.

The BUMP only allows setting up to 4.25V as the max volts/cell. I know it's not much of a difference but you would think the BUMP would accommodate the configuration of its own brand packs.
Anything above 4.20 is considered a high voltage lipo - if u use the LiHV chemistry instead of LiPo, it will let u go up to 4.35.
RevoKelly is offline        Reply With Quote
Old 12-18-2016, 01:43 AM   #3
lmcwilli
Registered Users
 
Posts: 501
Thread Starter Thread Starter
 

Join Date: Sep 2011
Location: US,Maryland,Frederick
Default

Great. Simple. Thanks. Sounds like I'll need to replace those bump tags.
__________________
Blade 450X, Witespy Quad, Gaui X3, Gaui X5, Goblin 570, Goblin Black Thunder

Last edited by lmcwilli; 12-18-2016 at 08:30 AM..
lmcwilli is offline        Reply With Quote
Old 12-18-2016, 09:38 AM   #4
RevoKelly
Registered Users
 

Join Date: Sep 2015
Location: USA
Default

Quote:
Originally Posted by lmcwilli View Post
Great. Simple. Thanks. Sounds like I'll need to replace those bump tags.
Unfortunately, yes if u want to charge above 4.25. We use a different chemistry type to distinguish regular vs HV lipos to avoid accidentally mixing them, especially when parallel charging.
RevoKelly is offline        Reply With Quote
Old 12-19-2016, 08:33 AM   #5
lmcwilli
Registered Users
 
Posts: 501
Thread Starter Thread Starter
 

Join Date: Sep 2011
Location: US,Maryland,Frederick
Default

NP
__________________
Blade 450X, Witespy Quad, Gaui X3, Gaui X5, Goblin 570, Goblin Black Thunder
lmcwilli is offline        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Electronics Support > FMA/Revolectrix Product Support


FMA/Revolectrix Product Support FMA/Revolectrix Factory Product Support

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2016 by RCGroups.com, LLC except where otherwise indicated. The HeliFreak.com logo is a trademark of RCGroups.com, LLC.