Trex 450 Pro build videos

[cpmboy]

well....heres goes nothing...........gyrooooonomoooooooo!!!

[cpmboy]

already do the grip and I move the balls closer to center +-8mm.....do I need to lengthen @ shorten the pushrod?...

[AMID]

PLEASE CONFIRM
If the Receiver FINLESS uses in the build
is the AR 6115 ??????

That's the one I plan to use, but I would like a confirmation..

If not, is the AR 7000 a reasonable one to use ? and what
about available space ? ( it has 2 parts)

HeliProz ' kit is due to arrive either tonight or tomorrow

FINLESS : I cannot thank you enough for these build videos.
Last I built was the GMP CRICKET and the GMP COBRA ( 20 + years ago)
and was only able to make the COBRA fly....
THANKS AGAIN.......my build begins this week

[Riff]

AMID: sats are always a good choise if compared to a unit with no sats! AR6115 will work but AR7000 is better, AR6200 or AR6210 would be perfect for a 450 Pro

[Finless]

I used a AR6100 which they do not make anymore. The 6115 will be fine.

Bob

[navyjay007]

Originally Posted by Finless

I used a AR6100 which they do not make anymore. The 6115 will be fine.

Bob

Hey Finless, Do you know which channels should be reversed on the dx6i for my 450 Pro v2 with 3gx.

[crf69]

still kind of intimidated by this little guy.

i have been flying since August of 2011

Align 450 BeastX (5 min 11 sec)

[cpmboy]

A friend of mine was commenting on my 450 pro linkage rod (ele servo-swash) which was not vertically straight upwards. Its was in an angle toward the swash (ball at outer position) and from what I saw on other 450's, most are vertically upward as the pi and ai linkage. Well it flew (just hovering, no 3D) just nice and its been like this since I finished building it. Any comment 450 pro owner & mr finless?....myb I can make it vertical if I chance the ball position (toward the center). Heres the video on other 450 helis...

[ame]http://www.youtube.com/watch?v=2mRWMOGc5gA&feature=g-all-u&context=G21b9eb4FAAAAAAAAQAA[/ame]

[Dnnap]

Originally Posted by navyjay007

Hey Finless, Do you know which channels should be reversed on the dx6i for my 450 Pro v2 with 3gx.

Good question, I'll need this info soon also.
I'm thinking of building a pro V2 3Gx while referencing Bobs videos, but I have a DX6i, which I believe cannot be used with the built in receiver in the 3GX. I will need to use a difference receiver for the DX6i, but I'm not sure if the 6115 will work. Can anyone tell me which receiver would work well with the Trex 450 Pro V2 3Gx and a DX6i ??

Thanks sooo much Bob for the great build videos!!! I can't wait to get started.

[Gugus junior]

Hello

My new video

[ame]http://www.youtube.com/watch?v=VKvckl_8zRQ&feature=youtube_gdata_player[/ame]

Alexandre

[racerjeffrc]

nice vid man thow the ending is less to be desired aha

[Jimini]

Great videos! I am going to use it soon on my 450!