Microheli upgrade instructions?

[cspcrx]

I picked up some microheli upgrades, swash plate upper head and lower head, for my mcx2. I can not seem to find any instructions on installing the parts especially the lower head and swashplate. I appreciate any help or points in the right direction.

[cspcrx]

Nothing? It must be super easy then and I am over thinking it.

Lots of videos on the inner shaft, that is easy but nothing on how to change the swash plate on the MCX2.

Any help or points in the right direction are greatly appreciated.

[Pfloyd]

Take the body completely off.

Take the skids off.

Carefully unsrew the lower gear and remove it.

Disconnect the swash from the push rods.

Take the upper gear off, just pops off.



Pull the whole assembly out of the frames,.

Pull the inner shaft out.

Take the little outer shaft thingy off, 1 screw, Notice that the raised end faces down.

Take off the swash. Dsiconnect the links from the blades.

Take off the anit rotation part.

Replace with your parts and put it all together the way you took it apart but reverse the procedure.

[cspcrx]

Pfloyd as always thank you!