Cannot bind my Mini CP with DEVO7

[pomz]

Hi,
I cannot bind my Mini CP with DEVO7, but it has been work before.

Please suggest..... thanks in advanced.

[mescalinedream]

Do you have a fixed ID setup? what did you do to lose the bind?

Before you do everything below, make sure you didnt turn off fixed ID. That might have done it.

You might have to use the bind plug that came with the mini and install it into the elevator servo port. The elv.is the lowest plug on the back of the RX. turn on the devo7 and put a battery into the mini and plug it in.

Now unplug the bind plug and install the servo plug back into the elevator plug. In the devo7 make sure you do not have the radio on fixed ID.

[zzyzx]

must be broken, dispose of it