Alternative Main Shaft Fusion 50/Outrage 550

[cphannaford]

I was doing some research and ran across the Gaui R5 main shaft.

Diameter: 10mm
Length: 175mm
End of shaft to center of hole: 43mm
End of shaft to center of hole: 8mm
Bolt size: 4mm

http://www.helidirect.com/gaui-r5-ma...5mm-2-pcs.html

I need to measure a spare...but anyone think this might work???

[beltfedbrowning]

I have used lots of mainshafts on lots of different helis. If the length is off, you can just change the lengths of the links to the swash. You may gain or lose some pitch . I used a predator head on My JR Ergo gasser. It sure was purdy!
Anybody know what a Raptor 30/50 mainshaft measures. Ronlund has 185 of them for $5 each!

Edit= Raptor 30-50 shaft
10mm diameter
Length=179mm
3mm hole 10mm from end
3mm hole 4.35mm from other end

[skywalker10]

cphannaford, in case you haven't solved your question, here goes the Fusion main shaft specs.
Length-100mm
Diameter- 10mm with 9mm step
Top end Hole-10mm from end
Lower end Hole-15mm from end
Both holes 3mm
Length of step -4.4mm
I guess you would be 21mm short in shaft lenght