Th. curve

[ETIII]

Whats a good th curve for my 700 i have my gov set at 1950.thanks

[ualdrivr]

I have it, Normal 0-75-100, Idle Up 1 100-85-100 and Idle Up 2 100 flat and that is with the AR 7100/R.

[Helico-pteron]

While I hate to disagree with ualdriver, his curves are a bit aggressive.

N- 0/25/50/75/100
1- 100/75/50/75/100
2- 100/75/50/75/100

If you are using a governor then you just need your curves to keep the heli in the air to get it down safely if for some reason the gov fails.

[J-S-Q]

Originally Posted by Helico-pteron

While I hate to disagree with ualdriver, his curves are a bit aggressive.

N- 0/25/50/75/100
1- 100/75/50/75/100
2- 100/75/50/75/100

If you are using a governor then you just need your curves to keep the heli in the air to get it down safely if for some reason the gov fails.

I'd agree with that although I guess Ualdrvr is running more aggressive curve because he is using a rev limiter

[Helico-pteron]

Originally Posted by J-S-Q

I'd agree with that although I guess Ualdrvr is running more aggressive curve because he is using a rev limiter

True, a rev limiter would require higher curves. The OP is using a gov though.

[chuckk]

Originally Posted by ETIII

Whats a good th curve for my 700 i have my gov set at 1950.thanks

what gov are you using? the multigov for instance wants a linear curve in normal (for std mode) and 100-80-100 in stunt 1/2 (for 3d mode).

this piece of info might yield better answers.

[Helico-pteron]

Originally Posted by chuckk

what gov are you using? the multigov for instance wants a linear curve in normal (for std mode) and 100-80-100 in stunt 1/2 (for 3d mode).

this piece of info might yield better answers.

I'll bet money he is using the Align gov included in the kit.

[ETIII]

Thanks for the reply guys ,im useing a GV1 futaba gov. thanks

[ualdrivr]

I'll bet money he is using the Align gov included in the kit.

[Helico-pteron]

Originally Posted by ualdrivr

craaap

[ualdrivr]

Originally Posted by Helico-pteron

craaap

Too late now, I should 've bet you some money...

[Helico-pteron]

Originally Posted by ualdrivr

Too late now, I should 've bet you some money...

[chuckk]

Originally Posted by Helico-pteron

I'll bet money he is using the Align gov included in the kit.

second question, are you more interested in good throttle curves or good headspeeds?

[ETIII]

Originally Posted by chuckk

second question, are you more interested in good throttle curves or good headspeeds?

Good headspeeds lol

[chuckk]

i've got OS .91 engines in all my 90's. i run 1750 in normal, 1880 in stunt 1, and 1950 in stunt 2. 80% of my flying is in stunt 2 and a nicely tuned engine will give you all the power you need.