Rush 750 Evolution

[Michaelinpr]

With 17mm the ball link on the elevator horn just hits the anti rotation bracket. I added a little cyclic ring in the spartan. That is with 13* and 11* cyclic.

[Feral]

Originally Posted by Michaelinpr

With 17mm the ball link on the elevator horn just hits the anti rotation bracket. I added a little cyclic ring in the spartan. That is with 13* and 11* cyclic.

11 cyclic is a bit more than I run I have 12.5coll and 9.5 cyc.

Maybe back down the cyc and up the mid stick agility or agility to get a similar feel

[Michaelinpr]

Good idea Feral. I will look into that. My evo is down for now though until I can get the front tt gears replaced.

[PowerDyne]

Mine is too for now. Waiting on front gearset as well, and my tail servo that was supposed to be delivered today apparently fell into a wormhole.

[Ah Clem]

I have heard that the Trex 700E torque tube gears will fit (although I have no idea which version).

I think some of the team guys were actually using them.

[PowerDyne]

Originally Posted by Ah Clem

I have heard that the Trex 700E torque tube gears will fit (although I have no idea which version).

I think some of the team guys were actually using them.

I had seen that for the Original model, but the Evo uses a different size counter gear, and the upper bevel gear and hub are proprietary to the Evo, or I would be all over that option.

[Ah Clem]

Thank you PowerDyne.

I did not realize that they were that different, sir. I know that when I did see the Align gears in one, it was the original Rush, not the Evo.

[OnTheSnap]

I ran my old Rush on all align gears. Held up far better than stock.

[PowerDyne]

...