START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
600 Class Electric Helicopters 600 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
04-17-2015, 06:46 AM | #1 (permalink) |
Registered Users
Join Date: Jan 2014
|
Custom CF 600 update.
Just wanted to thank everyone that gave me pointers and helped with what parts would fit this build. I never heard anyone say JUST GET A 600 DFC or 600L kit. Everyone stayed on point with the project.
I did hover the build a few times after finishing it.... BUT I ordered the Tarot FBL head block and the Align DFC blade holders. I'm using the Green KDBB dampeners with an Align feathering shaft. I had the light gray Align dampeners.... WOW I can't even say how much stiffer the KDBB's are. The Tarot 600 FBL head block is just SO MUCH BETTER ..than the Align FBL block that I had picked up used here n HF. I installed a Robird G31 FBL controller. But ran into a problem with the setup. I had to ordered turn buckles due to not being able the get the Zero Pitch right. ( no longer have a link that equals a half turn ) Just coundn't get it right. So once I get those installed I can finish the setup and go to the field.
__________________
KDS Agile 6.4 Proto-Type 750MX 12s with an Ikon / KDS Agile 7.2 / Tarot-Align 600CF-FBL Robird G31 12S / The First X3-385 FROM AUTO-CAD to DIRT NAP in 10 SECONDS ! |
Sponsored Links | |||
Advertisement |
|
07-27-2015, 06:36 AM | #2 (permalink) |
Registered Users
Thread Starter
Join Date: Jan 2014
|
WOW
this has been a project...... After getting everything finished up ( installing the FBL head with the Robird G31.............. I installed a plug wrong on a new set of batteries....... Can u say POW ! Ya.... BEC .. Robird .. CC ice2 80HV all toast... I have installed a YGE/YEP 180HV and a new Robird G31. I didn't go BEC this time... its setup for a 2 s LiFe 1800mah pack. I was able to get 4 flights in at the field on Sunday with this bird. Its been fun even though I toasted over 450 dollars in elect's LOL But it fly's great.... I'm sure after some turning in the ROBIRD G31 it will be even better.
__________________
KDS Agile 6.4 Proto-Type 750MX 12s with an Ikon / KDS Agile 7.2 / Tarot-Align 600CF-FBL Robird G31 12S / The First X3-385 FROM AUTO-CAD to DIRT NAP in 10 SECONDS ! |
Thread Tools | |
Display Modes | |
|
|