Register Now

mmickels · 10-01-2011, 05:29 PM

I recently bought a used Trex 550E that has been converted to flybarless. I have three more connections to make to the reciever, and I'm not sure where to plug them in at. The previous owner was kind enough to mark the plugs. Gear, Battery, and Aux1 are the plugs in question. Any additional help and links for FBL setup would be helpful too. Thanks!

Mark

crashagain · 10-03-2011, 10:54 PM

What flybarless uint are you using?

mmickels · 10-04-2011, 01:31 AM

The control is a Skookum 360? The head is an RJX. I took it to the local FF this weekend and some of the guys were nice enough to set it up for my radio and even test fly it. This thing is scary when compared to my 450!

crashagain · 10-04-2011, 09:24 AM

Sounds like you got it going then.
The 550 is an awesome maching, you'll enjoy it.

mmickels · 10-04-2011, 11:56 AM

To my surprise, most of the setup was done on the Skookum, and not the radio. This machine is scary compared to my 450!

10-01-2011, 05:29 PM	#1 (permalink)
mmickels Registered Users My HF Map location Join Date: Jul 2011	Futaba 7C set up help I recently bought a used Trex 550E that has been converted to flybarless. I have three more connections to make to the reciever, and I'm not sure where to plug them in at. The previous owner was kind enough to mark the plugs. Gear, Battery, and Aux1 are the plugs in question. Any additional help and links for FBL setup would be helpful too. Thanks! Mark

10-03-2011, 10:54 PM	#2 (permalink)
crashagain Registered Users Join Date: Jul 2007	What flybarless uint are you using? __________________ Trex 600E FBL....Trex700DFC...Trex700FBL more to come.....

10-04-2011, 01:31 AM	#3 (permalink)
mmickels Registered Users Thread Starter My HF Map location Join Date: Jul 2011	The control is a Skookum 360? The head is an RJX. I took it to the local FF this weekend and some of the guys were nice enough to set it up for my radio and even test fly it. This thing is scary when compared to my 450! Last edited by mmickels; 10-04-2011 at 03:43 AM..

10-04-2011, 09:24 AM	#4 (permalink)
crashagain Registered Users Join Date: Jul 2007	Sounds like you got it going then. The 550 is an awesome maching, you'll enjoy it. __________________ Trex 600E FBL....Trex700DFC...Trex700FBL more to come.....

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-04-2011, 11:56 AM	#5 (permalink)
mmickels Registered Users Thread Starter My HF Map location Join Date: Jul 2011	To my surprise, most of the setup was done on the Skookum, and not the radio. This machine is scary compared to my 450!

Register Now

Log-in