Register Now

banditpowdercoat · 03-22-2012, 07:56 PM

Just want to make a list, for peoples reference to what they have set their BX at on their Protos. Compare settings and maybe someone will have a better setup.

Futaba s9650 collective servos and Align DS650 Tail. Edge 423mm Blades, Stretched tail with KBDD Blades
Collective +-13*

Pot 1 1/2 tick Neg
Pot2 3 tick Positive
Pot3 1 tick Positive
b: Control Behavior, Blue, Transmitter
c: pitching up behavior, Purple Very low
d: tail headlock gain, red, Medium: 67% in radio
e: stick deadband, red flashing,
f: tail precomp, Blue Flashing, Low
g: cyclic response, red, Increased
h: pitch boost, Red flashing, Low

matthewcornell · 01-09-2013, 05:12 PM

Thanks for this, banditpowdercoat. I would love to see what others have used. I'm in the process of tuning my 7200, starting with the tail. I'm also interested in mechanical setup, like ball positions on servo horns. The next thing I'm trying is moving the rudder servo ball out one hole. This is because I was up to 85% gain - out of 0-100% - and hadn't been able to see any oscillation yet. My setup: DS510M's and DS520, AR7200BX.

banditpowdercoat · 01-10-2013, 12:26 AM

I think my settings a little changed now. Have a rock solid tail and cyclic seems pretty precice and stops on a dime. havent flown in 2 months tho, over a foot of snow here. Maybe soon tho. havin withdrawls

pani · 01-10-2013, 12:54 AM

Turnigy MG930 collective servos and Futaba 9257 Tail. Edge 473mm Blades, Stretched tail with MSH orange Blades
Collective +-13

Pot 1 3 ticks CW from center
Pot2 Center
Pot3 2 ticks CW from center
b: Control Behavior, Blue, Transmitter
c: pitching up behavior, Purple Very low
d: tail headlock gain, red, Medium: 75% in radio JR X9303
e: stick dead band, red flashing
f: tail precomp, Red, High
g: cyclic response, red, Increased
h: pitch boost, Purple, Off

clicky · 01-10-2013, 03:11 AM

Could you, please, include your personal preferences with Control Behavior set to Transmitter - i.e. dual rate and expo values? (maybe mention if your servo travel is left at 100% or maxed so D/R percentage has meaning)

Practically same as for tail gain...

bbywatmtzz · 01-11-2013, 02:26 PM

Im just finishing up my Beastx setup on my Trex 450 Pro, does anyone have a good gain settings with Futaba 8FG Heli version radio? Maybe someone out there can share their settings on the beastx and Futaba 8FG transmitter as well so I can cross reference it with my settings?

Thank you much,
bbywatmtzz

03-22-2012, 07:56 PM	#1 (permalink)
banditpowdercoat Registered Users My HF Map location Join Date: Sep 2010	Post your Protos BeastX settings Just want to make a list, for peoples reference to what they have set their BX at on their Protos. Compare settings and maybe someone will have a better setup. Futaba s9650 collective servos and Align DS650 Tail. Edge 423mm Blades, Stretched tail with KBDD Blades Collective +-13* Pot 1 1/2 tick Neg Pot2 3 tick Positive Pot3 1 tick Positive b: Control Behavior, Blue, Transmitter c: pitching up behavior, Purple Very low d: tail headlock gain, red, Medium: 67% in radio e: stick deadband, red flashing, f: tail precomp, Blue Flashing, Low g: cyclic response, red, Increased h: pitch boost, Red flashing, Low __________________ Dan Pesonen FBL, Don't think about it, DO IT. mCX2, nCPX, mCP X, Blade 400, MSH PRÔTOS, T-700N "Tri-Flow" I put that S*** on everything!"

01-10-2013, 12:26 AM	#3 (permalink)
banditpowdercoat Registered Users Thread Starter My HF Map location Join Date: Sep 2010	I think my settings a little changed now. Have a rock solid tail and cyclic seems pretty precice and stops on a dime. havent flown in 2 months tho, over a foot of snow here. Maybe soon tho. havin withdrawls __________________ Dan Pesonen FBL, Don't think about it, DO IT. mCX2, nCPX, mCP X, Blade 400, MSH PRÔTOS, T-700N "Tri-Flow" I put that S*** on everything!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-09-2013, 05:12 PM	#2 (permalink)
matthewcornell Registered Users My HF Map location Join Date: Mar 2011	Thanks for this, banditpowdercoat. I would love to see what others have used. I'm in the process of tuning my 7200, starting with the tail. I'm also interested in mechanical setup, like ball positions on servo horns. The next thing I'm trying is moving the rudder servo ball out one hole. This is because I was up to 85% gain - out of 0-100% - and hadn't been able to see any oscillation yet. My setup: DS510M's and DS520, AR7200BX.

01-10-2013, 12:54 AM	#4 (permalink)
pani Registered Users Join Date: Mar 2007	Turnigy MG930 collective servos and Futaba 9257 Tail. Edge 473mm Blades, Stretched tail with MSH orange Blades Collective +-13 Pot 1 3 ticks CW from center Pot2 Center Pot3 2 ticks CW from center b: Control Behavior, Blue, Transmitter c: pitching up behavior, Purple Very low d: tail headlock gain, red, Medium: 75% in radio JR X9303 e: stick dead band, red flashing f: tail precomp, Red, High g: cyclic response, red, Increased h: pitch boost, Purple, Off

01-10-2013, 03:11 AM	#5 (permalink)
clicky Registered Users Join Date: Dec 2007	Could you, please, include your personal preferences with Control Behavior set to Transmitter - i.e. dual rate and expo values? (maybe mention if your servo travel is left at 100% or maxed so D/R percentage has meaning) Practically same as for tail gain...

01-11-2013, 02:26 PM	#6 (permalink)
bbywatmtzz Registered Users Join Date: Mar 2011	Im just finishing up my Beastx setup on my Trex 450 Pro, does anyone have a good gain settings with Futaba 8FG Heli version radio? Maybe someone out there can share their settings on the beastx and Futaba 8FG transmitter as well so I can cross reference it with my settings? Thank you much, bbywatmtzz

Register Now

Log-in