vent holes in canopy.

crf69 · 07-04-2012, 03:12 AM

anybody do this?

my shit gets hot as ****.

mamartin · 07-04-2012, 04:37 PM

Do you have an external BEC? If not get a CC 20amp BEC pro. You will notice a drastic change in operating temps on your equipment.
It's only about a 30$ investment and helps a lot

crf69 · 07-04-2012, 04:46 PM

Quote:

Originally Posted by mamartin

Do you have an external BEC? If not get a CC 20amp BEC pro. You will notice a drastic change in operating temps on your equipment.
It's only about a 30$ investment and helps a lot

i'm scard to mess withmy stock setup.....it has been flawless!!!!

but that is the reason for everything to be so hot....dont help its 100 here either.

mamartin · 07-04-2012, 05:43 PM

It's the same here dude. 100 to 105 degrees, hot as hell with zero wind.

My heli was the same as far as worried about goofing my setup up but once you get it and do it you will see cooler temps on your stuff with better efficiency on your batts because it's a switching BEC and should an unfortunate incident occur such as your ESC taking a crap you will then still be able to auto your X5 down to the ground.

With as good as your getting you will definitly notice a temp improvement and it doesn't wiegh anything hardly at all.

If you do it you won't regret it.

Please keep those sick videos coming

Mike

gbidwell · 07-04-2012, 05:51 PM

Quote:

Originally Posted by crf69

i'm scard to mess withmy stock setup.....it has been flawless!!!!

but that is the reason for everything to be so hot....dont help its 100 here either.

the only way an external BEC will mess with your setup is via interference, which will be obvious. Get yourself a CC BEC Pro. Cheap and reliable.

In respect to cooling holes...why not? If your flying when its 40 C outside then it would be a good idea to provide more air flow. I have done this with all of my nitro and electric rc cars, since they dont go as fast and dont have prop wash to cool the components.

You will weaken the canopy...so choose wisely. I would suggest one 20-30mm hole either side of the canopy, inline with the ESC, similiar to how thunder tiger vents their canopies.

mamartin · 07-04-2012, 06:26 PM

You could always fly nude too

That way you save about 50$ if you crash

crf69 · 07-04-2012, 09:01 PM

haha yeah never thought of that!!

gbidwell · 07-04-2012, 10:24 PM

Quote:

Originally Posted by mamartin

You could always fly nude too

That way you save about 50$ if you crash

although you do reduce the lipo protection by doing so and also limit visibility.

helidude71 · 07-05-2012, 03:21 PM

My motor goes up to 50C (122F)
BEC, ESC and lipo around 45C (113F)
Outside temps around 26C (79F)

No problem at all.

crf69 · 07-05-2012, 03:25 PM

i just need to buy a cheapo battery operted fan.....to cool my shit so i can fly quicker.....i have 7 batteries and waiting 15 minutes sucks between flights

gbidwell · 07-05-2012, 05:54 PM

Definitely a good idea. I forgot to mention this us exactly what I do with me electric RC truggy. Castle creations mamba monster has an inbuilt fan and the motor has a castle fan shroud. Works a treat.
Get some 5v fans and run them straight from your RX. Are you running 6v on the RX ?

07-04-2012, 04:37 PM	#2
mamartin Registered Users Join Date: Jul 2011 Location: Alvarado, Texas	Do you have an external BEC? If not get a CC 20amp BEC pro. You will notice a drastic change in operating temps on your equipment. It's only about a 30$ investment and helps a lot __________________ iKON field Rep GAUI NX4 with iKON, EDGE blades O.S.37 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. GAUI X5fes, iKON, Edge blades, CC 20amp BEC pro, Align 600Npro, iKON, OS55HZ, Funkey B320 3D pipe, Radix Blades,

07-04-2012, 05:43 PM	#4
mamartin Registered Users Join Date: Jul 2011 Location: Alvarado, Texas	It's the same here dude. 100 to 105 degrees, hot as hell with zero wind. My heli was the same as far as worried about goofing my setup up but once you get it and do it you will see cooler temps on your stuff with better efficiency on your batts because it's a switching BEC and should an unfortunate incident occur such as your ESC taking a crap you will then still be able to auto your X5 down to the ground. With as good as your getting you will definitly notice a temp improvement and it doesn't wiegh anything hardly at all. If you do it you won't regret it. Please keep those sick videos coming Mike __________________ iKON field Rep GAUI NX4 with iKON, EDGE blades O.S.37 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. GAUI X5fes, iKON, Edge blades, CC 20amp BEC pro, Align 600Npro, iKON, OS55HZ, Funkey B320 3D pipe, Radix Blades,

07-04-2012, 06:26 PM	#6
mamartin Registered Users Join Date: Jul 2011 Location: Alvarado, Texas	You could always fly nude too That way you save about 50$ if you crash __________________ iKON field Rep GAUI NX4 with iKON, EDGE blades O.S.37 To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. GAUI X5fes, iKON, Edge blades, CC 20amp BEC pro, Align 600Npro, iKON, OS55HZ, Funkey B320 3D pipe, Radix Blades,

07-05-2012, 03:21 PM	#9
helidude71 Registered Users Join Date: Apr 2010 Location: The Netherlands	My motor goes up to 50C (122F) BEC, ESC and lipo around 45C (113F) Outside temps around 26C (79F) No problem at all. __________________ T-Rex 500 ESP FBL, Microbeast v3, Scorpion HK-3026-1600, CC ICE 75 TSH Gaui X5 FES, Microbeast v3, S.Bus, DS610s, DS650, YGE 100LV Futaba T7C Phoenix R/C v4

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-05-2012, 05:54 PM	#11
gbidwell Registered Users Join Date: Apr 2010 Location: Melbourne, Australia	Definitely a good idea. I forgot to mention this us exactly what I do with me electric RC truggy. Castle creations mamba monster has an inbuilt fan and the motor has a castle fan shroud. Works a treat. Get some 5v fans and run them straight from your RX. Are you running 6v on the RX ?