Want to buy a Protos 500 but, what servos do I buy?

[Wind]

Hi mates, I wanna buy a Protos 500 carbon and don´t know what servos to buy. I would like to buy them at Hobbyking store, any recomendation?
Perhaps these for cyclic?

or these ones?

And for the tail?
Would like something not very expensive at first. But good enough.
I am a Sport flying man with loopings, inverted flying and things like that.
Thanks in advance.

[sp00fman]

That 930 seems a bit slow for a flybarless heli and reports on them made me decide not to get these.
The specs on the rotorstar look better.

A relatively safe bet are these:
https://www.hobbyking.com/hobbyking/...dproduct=23219
I got a set for cyclic and am super happy with them for the price. Using them on a Hurricane 425. (2,1kg AUW 500 size) and would be my personal pick for the Protos if i had to.

For the tail i have this on my Protos500 but also run them on the 450 size with succes:
https://www.hobbyking.com/hobbyking/...dproduct=23220
Rock solid tail.

I say relatively safe bet because HK made a minor change in the servo case after i bought mine and you never know for sure what else they changed.

-Rasmus

[gstoneberg]

I have tgy-930s on my p500 for cyclic. Seems to do OK. The pilot...not so much. The Protos flies really nicely, but not quite as true as my Trex550, though the larger size is also helping.

P500 9-20-15 Flight (3 min 20 sec)

[HarryR]

Have a look at this list if you are going to use a BEASTX or a Spektrum AR7200X

http://wiki.beastx.com/index.php/The..._servo_list/en

If you check for speed and physical size ( mini servo not full size) and it is on the list , it will work. There is nothing wrong with buying some used servos. Having servo's that can be repaired ie you can swap the gears is a good thing to consider.
I have been using Futaba, Align, JR and they all work fine. All my Protos 500 have Spektrum AR7200X FBL boxes on board.

[Jumna]

I like the kst DS515 servos, hi spec but not MKS expensive.

[kayakboy69]

Originally Posted by HarryR

Have a look at this list if you are going to use a BEASTX or a Spektrum AR7200X

http://wiki.beastx.com/index.php/The..._servo_list/en

If you check for speed and physical size ( mini servo not full size) and it is on the list , it will work. There is nothing wrong with buying some used servos. Having servo's that can be repaired ie you can swap the gears is a good thing to consider.
I have been using Futaba, Align, JR and they all work fine. All my Protos 500 have Spektrum AR7200X FBL boxes on board.

This guy would know he's got a few P500s

[KatoSan]

Hello

I Fly mine with tgy616.
Good specs, not to expensive and Great In the air.
http://www.hobbyking.com/hobbyking/s...05sec_34g.html