Lama V3 Help

[helidude123]

Hello
I cracked the top head on the inner main shaft, so how do i remove the inner main shaft from the heli?

Thanks
-helidude

[JuZ]

http://www.eskylamav3.info/Esky_lama...al_upgrade.htm

The article is for fitting metal upgrades but it does explain how it comes apart, hope this helps

[helidude123]

thanks but it doesnt really say how to remove the inner shaft...does anybody know how to remove the inner shaft?

photos would be great
thanks in advance
-helidude

[JesusFreak]

Originally Posted by helidude123

thanks but it doesnt really say how to remove the inner shaft...does anybody know how to remove the inner shaft?

photos would be great
thanks in advance
-helidude

Take the landing gear off. Unscrew the two set screws in the collar of the gear on the bottom of the heli. Pull the bottom gear, and collar of the shaft. Note the slots cut in the shaft... when you reassemble, be sure the screws and the holes in the gear line up with the slot. Slide the inner shaft out, be careful not to lose the bearing on top of the outer shaft. That's about it.