01-20-2017, 05:39 PM
|
#1 (permalink)
|
|
Registered Users
|
Logo 400SE Airframe- Scorpion Motor- Blades- and Parts
I no longer have the time to fly like I used to, so I figured I would sale my 400SE
It was originally a 500 size bird swinging 430mm blades. I did the SE upgrade to 473mm blades and a longer tail boom. It also comes with Scorpion HK4015-1070kv motor, Edge 473mm main blades, Edge tail blades and many parts. Left & right frame set, front and rear tail case, tail fins, tail boom, landing gear, main shaft, 3 feathering shafts, ball links, clamp ring, swash follower, 0.5 module main gear with 0.5 front tail gear and 3 different 0.5 motor pinions for different kV motors/head speed, 0.7 module main gear with 0.7 front tail gear and 3 different 0.7 motor pinions for different kV motors/head speed. The belt and control rod for tail are for the standard size boom if it was put back to the shorter version.
I made a aluminum plate to install my FBL unit on. It is put on with double sided tape and can be removed but I think the new owner will like it, so I'm leaving it on. The canopy has a crack and couple small spots in the gell coat on the bottom. The crack and spots are not all the way thru. It is like this from just normal use of taking canopy on and off and where battery has pushed up against it. The top and sides of canopy look great. You have to really flip heli on its side or over to see spots on canopy. I have really kept extremely good care of this heli and hope whomever gets it enjoys it as much as I have!!!! If you have any questions please let me know.
I would like to get 250.00 shipped and paypaled! FIRM!!!!
Thanks for looking!! Brad
Last edited by baboyd; 01-28-2017 at 06:05 PM..
|
|
|
Linear Mode
