Trex-600 direct to swash frames

fpainter · 07-09-2012, 09:52 PM

These frame sets convert your Trex-600 from push pull to direct to swash linkage, and allow use of 50mm wide motors, and an extra equipment tray They work great with FBL systems.They use full sized servos,mounted between the frames on rails for improved geometry. Servos move from the center-ine of the main shaft out, not in a tangent like a Ttex550.

The natural green is translucent, and a buddy of mine is making a night flier with an illuminated frame. After building both up I prefer the Natural material- it is really easy to see to work on. and in the air.

I have not tried to convert an ESP. The tail should fit, but the ESP only uses two main shaft bearings you might need to add the lower one.

Check out my Blog at RCG for more details:

http://www.rcgroups.com/forums/showthread.php?t=1506028

I have (5) natural green G10 frame sets and (1) black frame set for sale.
These will include the 48mm control rods not usually part of the set. The black G10 frame set will include natural green fins.

Included:
(2) FRAME SIDES-G10
(2) UPPER STIFFENERS-G10
(2) LOWER STIFFENERS-G10
(2) MOTOR STIFFINERS-G10
(2) ANTI-ROTATION BRACKETS-G10
(3) EXTENDED SERVO ARMS-G10
(1) HORIZONTAL FIN-G10
(1) VERTICAL FIN –G10
(1) TAIL SERVO MOUNT –G10
(2) SERVO RAILS WITH BOLTS-ALUMINUM
(2) ANTI ROTATION BRACKETS –ALUMINUM

Needed to complete:
(1) Donor TREX-600 or HK-600GT
(3) 47-48MM LONG 2-56 CONTROL RODS
(6) 3MM x 8MM bolts.
(6) 3mm x 6MM bolts.

$65.00 each includes Paypal fees and CONUS shipping.

fpainter · 07-10-2012, 06:37 PM

Look Again, you need a set of these.

fpainter · 07-16-2012, 08:05 PM

Several of these are flying now.

fpainter · 07-16-2012, 08:09 PM

Maybe I have this post in the wrong place.

http://www.helifreak.com/showthread.php?t=433221

fpainter · 07-24-2012, 05:43 PM

fpainter · 07-24-2012, 05:44 PM

fpainter · 07-29-2012, 10:05 PM

fpainter · 07-29-2012, 10:05 PM

fpainter · 09-17-2012, 11:53 AM

fpainter · 09-17-2012, 11:54 AM

fpainter · 09-17-2012, 05:41 PM

picture of front servo mount

Luvmyhelis · 09-17-2012, 07:08 PM

Dang! Where were you a month ago before I spent twice this much cutting my own reinforced layered CF panels to do the same thing?

Nice work!

fpainter · 09-18-2012, 06:39 AM

new picture

fpainter · 09-25-2012, 02:20 PM

Quote:

Originally Posted by Luvmyhelis

Dang! Where were you a month ago before I spent twice this much cutting my own reinforced layered CF panels to do the same thing?

Nice work!

got any pictures?

07-09-2012, 09:52 PM	#1
fpainter Registered Users Join Date: Nov 2007 Location: Florence, KY,USA	Trex-600 direct to swash frames These frame sets convert your Trex-600 from push pull to direct to swash linkage, and allow use of 50mm wide motors, and an extra equipment tray They work great with FBL systems.They use full sized servos,mounted between the frames on rails for improved geometry. Servos move from the center-ine of the main shaft out, not in a tangent like a Ttex550. The natural green is translucent, and a buddy of mine is making a night flier with an illuminated frame. After building both up I prefer the Natural material- it is really easy to see to work on. and in the air. I have not tried to convert an ESP. The tail should fit, but the ESP only uses two main shaft bearings you might need to add the lower one. Check out my Blog at RCG for more details: http://www.rcgroups.com/forums/showthread.php?t=1506028 I have (5) natural green G10 frame sets and (1) black frame set for sale. These will include the 48mm control rods not usually part of the set. The black G10 frame set will include natural green fins. Included: (2) FRAME SIDES-G10 (2) UPPER STIFFENERS-G10 (2) LOWER STIFFENERS-G10 (2) MOTOR STIFFINERS-G10 (2) ANTI-ROTATION BRACKETS-G10 (3) EXTENDED SERVO ARMS-G10 (1) HORIZONTAL FIN-G10 (1) VERTICAL FIN –G10 (1) TAIL SERVO MOUNT –G10 (2) SERVO RAILS WITH BOLTS-ALUMINUM (2) ANTI ROTATION BRACKETS –ALUMINUM Needed to complete: (1) Donor TREX-600 or HK-600GT (3) 47-48MM LONG 2-56 CONTROL RODS (6) 3MM x 8MM bolts. (6) 3mm x 6MM bolts. $65.00 each includes Paypal fees and CONUS shipping. Attached Thumbnails Last edited by fpainter; 07-10-2012 at 06:36 PM..

07-16-2012, 08:05 PM	#3
fpainter Registered Users Thread Starter Join Date: Nov 2007 Location: Florence, KY,USA	Several of these are flying now. Attached Thumbnails

07-16-2012, 08:09 PM	#4
fpainter Registered Users Thread Starter Join Date: Nov 2007 Location: Florence, KY,USA	Trex-600 direct to swash frames Maybe I have this post in the wrong place. http://www.helifreak.com/showthread.php?t=433221

07-24-2012, 05:43 PM	#5
fpainter Registered Users Thread Starter Join Date: Nov 2007 Location: Florence, KY,USA	top

07-24-2012, 05:44 PM	#6
fpainter Registered Users Thread Starter Join Date: Nov 2007 Location: Florence, KY,USA	top

07-10-2012, 06:37 PM	#2
fpainter Registered Users Thread Starter Join Date: Nov 2007 Location: Florence, KY,USA	Look Again, you need a set of these.

07-29-2012, 10:05 PM	#7
fpainter Registered Users Thread Starter Join Date: Nov 2007 Location: Florence, KY,USA	ttt

09-17-2012, 11:53 AM	#9
fpainter Registered Users Thread Starter Join Date: Nov 2007 Location: Florence, KY,USA	ttt

09-17-2012, 11:54 AM	#10
fpainter Registered Users Thread Starter Join Date: Nov 2007 Location: Florence, KY,USA	ttt

09-17-2012, 05:41 PM	#11
fpainter Registered Users Thread Starter Join Date: Nov 2007 Location: Florence, KY,USA	Front servo mount picture of front servo mount Attached Thumbnails

09-17-2012, 07:08 PM	#12
Luvmyhelis Join Date: Jul 2010 Location: spokane,washington	Dang! Where were you a month ago before I spent twice this much cutting my own reinforced layered CF panels to do the same thing? Nice work!

09-18-2012, 06:39 AM	#13
fpainter Registered Users Thread Starter Join Date: Nov 2007 Location: Florence, KY,USA	Front servo mount new picture Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode