Register Now

tomroarh · 01-31-2012, 09:33 AM

I have a one week old mcpx, and today it stopped working.
It has not had any hard crashes or anything, all stock. only thin that has happened to it is popped of links in the head. today it started cutting out two or three times and then stopped all together. now it just flashes and will not connect to my dx6i. cant get it to bind again when i try. Is the 3-in-1 a weak component? can there be anything else wrong?
If anyone know an easy fix i will be most thankful.

vlz91 · 01-31-2012, 10:47 AM

I had the exact thing happen with my old msr, but not with the mcpx. I sent the msr and had a new one for HH in a week. Try having them replace it.

superjet112x · 01-31-2012, 10:50 AM

check your power wires, there known to come off inside the silicone wire wrap, give the white and black wires a little pull and see if they come off

SuperBee364 · 01-31-2012, 11:01 AM

In addition to Superjett's suggestion (which is most likely gonna fix your problem), another thing to consider...

If a connection to your 3-1 board is loose (servo, rear motor, main motor), the LED on the 3-1 board will flash rapidly. It'll flash at the same speed as it does when it's in binding mode. So give all your plug in connections a good check.

01-31-2012, 09:33 AM	#1 (permalink)
tomroarh Registered Users Join Date: Jan 2012	Damn 3-in-1 I have a one week old mcpx, and today it stopped working. It has not had any hard crashes or anything, all stock. only thin that has happened to it is popped of links in the head. today it started cutting out two or three times and then stopped all together. now it just flashes and will not connect to my dx6i. cant get it to bind again when i try. Is the 3-in-1 a weak component? can there be anything else wrong? If anyone know an easy fix i will be most thankful.

01-31-2012, 10:47 AM	#2 (permalink)
vlz91 Registered Users Join Date: Sep 2011	I had the exact thing happen with my old msr, but not with the mcpx. I sent the msr and had a new one for HH in a week. Try having them replace it. __________________ Blade mCP X (Microheli'd up - helimax 10a/thesteve/hp05/9t, old school single brushless, not reprogrammed) dx6i

01-31-2012, 10:50 AM	#3 (permalink)
superjet112x Registered Users Join Date: Dec 2009	check your power wires, there known to come off inside the silicone wire wrap, give the white and black wires a little pull and see if they come off __________________ Goblin 770 sport, Fast Devil 505 Oxy 3 Tereq edition 2017 Blade 360 cfx modified, Blade 360 cfx stock Blade 180 cfx ,Blade mcpx Trex 150

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

01-31-2012, 11:01 AM	#4 (permalink)
SuperBee364 Registered Users Join Date: Jan 2008	In addition to Superjett's suggestion (which is most likely gonna fix your problem), another thing to consider... If a connection to your 3-1 board is loose (servo, rear motor, main motor), the LED on the 3-1 board will flash rapidly. It'll flash at the same speed as it does when it's in binding mode. So give all your plug in connections a good check.

Register Now

Log-in