Gaui X7 tail with carbon cover.

[tuckermatt]

Fair enough, let us know how it goes when it's back in the air

[bullet3030]

Oke I finally got here back in the air. Had some searching to do also. It made this scary krrrrrr... on tail stops. Afther a search 1 tooth on the main crown gear wash overseen from the crash.

Not had the change to check on funnels though.

Now I always had high tail gain like 100.
Pretty solid tail except on the funnels I have no wag nothing. My servo linkage ball is at 15mm.Limits at 98 92 Is this high gain a problem?

[tuckermatt]

Nah I wouldn't worry, mines about 96

[bullet3030]

Thanks

[omerco]

Originally Posted by bullet3030

Oke I finally got here back in the air. Had some searching to do also. It made this scary krrrrrr... on tail stops. Afther a search 1 tooth on the main crown gear wash overseen from the crash.

If you have the "Krrrr" on tail stops I wouldn't be certain it is from the crash. could well be wrong bevel - crown mesh. there should be almost no slack to no slack there trying to rock the bevel from above. if you have the upgraded OWB it means the shim above it should be 1mm-1.1 mm max. the original 1.2 was always too much in my experience.

Also the newer white bevel and crown are made of better material and work better for me. I was replacing few crownד lately and the whites seem to have solved it.

I'm going to put whites on the tail box gears as well as soon as they arrive.

[bullet3030]

I already have some good flights in. Afther installing a new black crowngear the sound was gone. I always have mesh on the bevel and crown gear with 2 shims at the top. Although its very litle..
Went back to normal gears in the tail gearbox also good mesh. I always had pretty mutch but now its just a little tighter think its spot on.

[omerco]