Register Now

heli_shmeli · 01-04-2015, 06:09 PM

Just built my first heli and ended up breaking the tail from a loose screw midflight.

I need to replace a lot of the tail parts. I don't know all of them yet but I know I need a new boom, a new tail drive gear assembly with long umbrella gear (for the tail boom mount), another long umbrella hear and tail rotor shaft assembly (for the tail unit at the far end). I will probably also need a new main shaft and feathering shaft. The actual tail boom mount looks okay.

So if anyone knows if I can just buy 500 pro parts or maybe 500 DFC parts, that would be great.

Edit: Also, is the stabilizer mount necessary?

Gladius · 01-04-2015, 07:34 PM

There's another thread with the 17 unique dominator parts. Everything else should be compatible with the DFC pro.

heli_shmeli · 01-04-2015, 07:45 PM

Thank you for that, I'll look for that thread!

HindandSeek · 06-22-2015, 07:14 PM

Are there any parts compatible with an older 500GF that I currently have?
That would be great.

Fauropitotto · 06-22-2015, 08:34 PM

Go here: http://shop.align.com.tw/partfinder....p3tv5bgn5p8284

Click on the part numbers and compare them with the part numbers from the 500GF that you have.

01-04-2015, 06:09 PM	#1 (permalink)
heli_shmeli Registered Users Join Date: Jun 2014	500L dominator compatible parts Just built my first heli and ended up breaking the tail from a loose screw midflight. I need to replace a lot of the tail parts. I don't know all of them yet but I know I need a new boom, a new tail drive gear assembly with long umbrella gear (for the tail boom mount), another long umbrella hear and tail rotor shaft assembly (for the tail unit at the far end). I will probably also need a new main shaft and feathering shaft. The actual tail boom mount looks okay. So if anyone knows if I can just buy 500 pro parts or maybe 500 DFC parts, that would be great. Edit: Also, is the stabilizer mount necessary? __________________ reddit.com/r/rcheli 180 CFX---500L Dominator---Phantom 2 w/ Gopro via 10 Turn Helical vTx---DX8

01-04-2015, 07:34 PM	#2 (permalink)
Gladius Registered Users Join Date: Nov 2012 Location: Maryland	There's another thread with the 17 unique dominator parts. Everything else should be compatible with the DFC pro. __________________ <> Trex 600 ESP FBL, Trex 500 ESP FBL, Gaui X3, Oxy 3 <> <> Builds in progress: Logo 600SX, Synergy 516 <> *Spartan Vortex VX1e*

01-04-2015, 07:45 PM	#3 (permalink)
heli_shmeli Registered Users Thread Starter Join Date: Jun 2014	Thank you for that, I'll look for that thread! __________________ reddit.com/r/rcheli 180 CFX---500L Dominator---Phantom 2 w/ Gopro via 10 Turn Helical vTx---DX8

06-22-2015, 08:34 PM	#5 (permalink)
Fauropitotto Registered Users Join Date: Jun 2010	Go here: http://shop.align.com.tw/partfinder....p3tv5bgn5p8284 Click on the part numbers and compare them with the part numbers from the 500GF that you have. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-22-2015, 07:14 PM	#4 (permalink)
HindandSeek Registered Users Join Date: May 2015	Are there any parts compatible with an older 500GF that I currently have? That would be great.

Register Now

Log-in