Register Now

Finless · 05-25-2008, 09:50 AM

Below are 2 versions of the manual. The Production manual and the Pre-Production manual.

Thanks to Victor for supplying the Production version of the manual.

Align Trex700 PRODUCTION manual PDF format (25 Megs)

Align Trex700 PRE PRODUCTION manual zipped JPG format (13 Megs)

Bob

george0079 · 05-25-2008, 10:35 AM

File does not exist please contact the systems administrator

The link isn't working............

Finless · 05-25-2008, 10:38 AM

Ooops.... typo in URL.... Fixed.

Bob

george0079 · 05-25-2008, 10:42 AM

SWEET....

Thanks again Bob... You Da Man

george0079 · 05-25-2008, 10:51 AM

Wow. That kinda sucks. That build looks easy and fast. I was hoping it was gonna take a little longer.

Helirob · 05-25-2008, 10:54 AM

Thanks Bob, you are the greatest.

Rob

Megahertz · 05-25-2008, 12:27 PM

Here's a pdf version.

http://www.3dtechdev.com/helifreak/t...700man_pre.pdf

Finless · 05-25-2008, 12:30 PM

COOL thanks Megahertz..... I removed the JPG version and am uploading the PDF version now. Give it 5 minutes and it should be up.

Thanks man.....

Bob

jet22b · 05-25-2008, 07:30 PM

Many thanks to Bob and Megahertz for the 700N manual!!!!
I know things may change when the final manual come out, but, this will give me a good headup on the build of this bird!!!

Thanks again, guys!!

jet22b

heliguychris · 05-26-2008, 04:48 AM

Quote:

Originally Posted by Finless

OK per request here is the PRE RELEASE manual.
EXPECT CHANGES!

THis is just scans of the pages in JPG format. If someone wants to make this a PDF please do and I will replace it.

Align Trex700 manual zipped JPG format (13 Megs)

Bob

Your a legend, cheers for that

Rockohaulic · 06-24-2008, 05:47 PM

Torque Tube

The manual has the 2 bearings on the torque tube evenly spaced from each other, and evenly spaced from the ends.

What gives?

This is in complete contradiction to the 600 where the bearing is offset to help reduce vibration. If the bearings are evenly spaced, they act like nodes and set up a harmonic vibration.

Any idea why they went away from this when they got it right the first time?

harryboe · 06-27-2008, 06:57 AM

The situation with 2 bearings is a bit different. To crate a harmony wave the length of the middle section has to be twice the length (or multiplied by two) of the outer sections.
That's obviously not the case for critical lower frequencies and not an issue on higher ones. But it does not hurt to have it just a few millimeters offset ..

Finless · 12-31-2008, 09:21 AM

Thanks to Victor for supplying the Production version of the manual.

The manual can now be downloaded directly from Helifreak. I added a link to the first post so it is listed with the Pre-production version as well. It is also below for quick access.

Align Trex700 PRODUCTION manual PDF format (25 Megs)

Bob

ryblack04 · 01-12-2009, 09:34 AM

Does anyone know of an online manual for the trex 700 engine... I didnt get one and need some pointers on what the short needle valve is for and for tuning info.

thanks

OTA · 01-12-2009, 12:17 PM

Quote:

Originally Posted by ryblack04

Does anyone know of an online manual for the trex 700 engine... I didnt get one and need some pointers on what the short needle valve is for and for tuning info.

thanks

Made a reply to you in this thread https://www.helifreak.com/showthread.php?t=113299
Someone should move it to "engine and muffler" forum.

THX1138 · 01-30-2009, 05:37 PM

Thanks!

Lou

dizzymarkus · 03-05-2011, 06:18 PM

does or has anyone a manual with actual part numbers on them other than Chinese I dont read ?

Thanks a ton,
Markus

Helico-pteron · 03-10-2011, 08:01 PM

700LE

700LE 3G

700E

700E FC3 Super Combo

700E 3G Super Combo

dizzymarkus · 03-10-2011, 09:12 PM

Ty but the individual part numbers are still in chinese or something I can not read. AQll the previous manuals have had the actual part number along side it --usually aghn#### or something like, that please see pic ;0)

thank you,
Markus

ualdrivr · 03-31-2011, 02:09 PM

Quote:

Originally Posted by Helico-pteron

700LE

700LE 3G

700E

700E FC3 Super Combo

700E 3G Super Combo

05-25-2008, 09:50 AM	#1 (permalink)
Finless Team Taco VP My HF Map location Join Date: Nov 2005	Trex700 Manuals Below are 2 versions of the manual. The Production manual and the Pre-Production manual. Thanks to Victor for supplying the Production version of the manual. Align Trex700 PRODUCTION manual PDF format (25 Megs) Align Trex700 PRE PRODUCTION manual zipped JPG format (13 Megs) Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco! Last edited by Finless; 12-31-2008 at 09:10 AM..

05-25-2008, 10:35 AM	#2 (permalink)
george0079 Registered Users My HF Map location Join Date: Sep 2007	File does not exist please contact the systems administrator The link isn't working............ __________________ If, at first, you don't succeed, then skydiving is probably a bad idea for you.

05-25-2008, 10:38 AM	#3 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	Ooops.... typo in URL.... Fixed. Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

05-25-2008, 10:42 AM	#4 (permalink)
george0079 Registered Users My HF Map location Join Date: Sep 2007	SWEET.... Thanks again Bob... You Da Man __________________ If, at first, you don't succeed, then skydiving is probably a bad idea for you.

05-25-2008, 10:51 AM	#5 (permalink)
george0079 Registered Users My HF Map location Join Date: Sep 2007	Wow. That kinda sucks. That build looks easy and fast. I was hoping it was gonna take a little longer. __________________ If, at first, you don't succeed, then skydiving is probably a bad idea for you.

05-25-2008, 10:54 AM	#6 (permalink)
Helirob Kegerator Shill Account Join Date: Apr 2004	Thanks Bob, you are the greatest. Rob

05-25-2008, 12:27 PM	#7 (permalink)
Megahertz Registered Users My HF Map location Join Date: Jan 2008	Here's a pdf version. http://www.3dtechdev.com/helifreak/t...700man_pre.pdf

05-25-2008, 12:30 PM	#8 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	COOL thanks Megahertz..... I removed the JPG version and am uploading the PDF version now. Give it 5 minutes and it should be up. Thanks man..... Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

05-25-2008, 07:30 PM	#9 (permalink)
jet22b Registered Users My HF Map location Join Date: Oct 2006	Many thanks to Bob and Megahertz for the 700N manual!!!! I know things may change when the final manual come out, but, this will give me a good headup on the build of this bird!!! Thanks again, guys!! jet22b __________________ My your blades hit smooth air!! T-Rex 600N Pro-OS Max50-Futaba GY611/S9256-DX-7 System 5 T-Rex 600E in Hangar!!!!! AMA Member T-Rex 700N PRO - OS MAX 91SZ

06-24-2008, 05:47 PM	#11 (permalink)
Rockohaulic Registered Users Join Date: May 2006	Torque Tube The manual has the 2 bearings on the torque tube evenly spaced from each other, and evenly spaced from the ends. What gives? This is in complete contradiction to the 600 where the bearing is offset to help reduce vibration. If the bearings are evenly spaced, they act like nodes and set up a harmonic vibration. Any idea why they went away from this when they got it right the first time?

06-27-2008, 06:57 AM	#12 (permalink)
harryboe Registered Users Join Date: Dec 2006	The situation with 2 bearings is a bit different. To crate a harmony wave the length of the middle section has to be twice the length (or multiplied by two) of the outer sections. That's obviously not the case for critical lower frequencies and not an issue on higher ones. But it does not hurt to have it just a few millimeters offset ..

12-31-2008, 09:21 AM	#13 (permalink)
Finless Team Taco VP Thread Starter My HF Map location Join Date: Nov 2005	Thanks to Victor for supplying the Production version of the manual. The manual can now be downloaded directly from Helifreak. I added a link to the first post so it is listed with the Pre-production version as well. It is also below for quick access. Align Trex700 PRODUCTION manual PDF format (25 Megs) Bob __________________ "Don't Taco My Pack Dude!" NEW Video Link -> Safety Video #1 Video Link -> CAUTION using powerful tools! Video Link -> How to CRASH TWICE in one flight! Video Link -> Don't Taco!

01-12-2009, 09:34 AM	#14 (permalink)
ryblack04 Registered Users Join Date: Dec 2008	OS91HZ manuel Does anyone know of an online manual for the trex 700 engine... I didnt get one and need some pointers on what the short needle valve is for and for tuning info. thanks __________________ Blessed is the man who perseveres under trial, because when he has stood the test, he will receive the crown of life that God has promised to those who love him. James 1:12

01-30-2009, 05:37 PM	#16 (permalink)
THX1138 Registered Users Join Date: May 2004	Thanks! Lou __________________ Time is an illusion. Lunch time, doubley so.

03-05-2011, 06:18 PM	#17 (permalink)
dizzymarkus Registered Users My HF Map location Join Date: Oct 2007	does or has anyone a manual with actual part numbers on them other than Chinese I dont read ? Thanks a ton, Markus

03-10-2011, 08:01 PM	#18 (permalink)
Helico-pteron Registered Users My HF Map location Join Date: Sep 2008	700LE 700LE 3G 700E 700E FC3 Super Combo 700E 3G Super Combo

03-10-2011, 09:12 PM	#19 (permalink)
dizzymarkus Registered Users My HF Map location Join Date: Oct 2007	Ty but the individual part numbers are still in chinese or something I can not read. AQll the previous manuals have had the actual part number along side it --usually aghn#### or something like, that please see pic ;0) thank you, Markus Attached Thumbnails

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in