130A Commander V new Firmware

[MrMel]

the firmware discussed with the softer startup is released.

http://www.scorpionsystem.com/downloads/

[rctintin]

Many thanks Mr Mel for sharing.

[geekindenial]

Strange I cannot find any firmware download on that download page at all. Is something wrong?

There are ESC manuals, programmers, Scorpion calculators but no firmware

[Costas]

I can confirm it was on there earlier and available for download.

Maybe there is a problem with the file and it may have been removed temporarily ???

[MrMel]

Scorpion wanted to change the way it was handled so they could keep track on the firmware, it will be available again as soon as that is completed.

[Costas]

OK - Sounds like a sensible idea.

BTW - How did you go testing the NEW improved slow spoolup on ice...

Thanks

[MrMel]

Just went outside, it's -10C outside here...
Result was good, my 600SE turned perhaps 20 degree totally during spoolup.

[Costas]

Only 20 deg or so - That is excellent..!

[Chris_M]

Cant wait to try this new version

[geekindenial]

So anyone knows when they will put the firmware back up? I want to update mine.

[aviator493]

Don't they already come equipped with soft start? Or is this a type of upgrade to it?

[Costas]

It is an improvement to the existing soft start feature.

Still has not been placed back up on Scorpion's website at this stage.

[MrMel]

should be online now,

http://www.scorpionsystem.com/catalo...tware_1/701_W/

(you need to register to download it)

[Costas]

Thanks for the 'Heads-Up' that its back on their site....!

[vincent_tx]

I downloaded and installed the latest firmware, but it still starts at break neck speed. I'm using the opto cable connected to my v-bar using the external governor setting. Is there something I'm missing? Maybe a setting in the v-bar. My motor is a Scorpion HKIII-4035-560.

[HelliYea]

Fullsize of mini vbar?
Are you starting up with a throttle curve something like 0,70,70,70,70 as per Mr Mel's video?

[vincent_tx]

Originally Posted by HelliYea

Fullsize of mini vbar?
Are you starting up with a throttle curve something like 0,70,70,70,70 as per Mr Mel's video?

I have a full size vbar. Which video recommends starting with that throttle curve?

[Costas]

What is your normal flight mode throttle curve like anyway?

On my JR12X, I have mine set to 0 at low stick and then at about 15% stick travel it jumps right up to 86 and is flat line from all the way there to full stick travel. ie similar to Helliyea's post.

I have found the start to be reasonably gentle even before I had just upgraded the firmware the other day [still need to test the new firmware myself].

[vincent_tx]

I have a JR 9503 and my curve is 0-15-96-96-96-96-96.

[MrMel]

Post a copy of your VBar file and I will check it, That said, if nothing pops in that, I would say you should contact scorpion and see if they can test it or replace it, I heard one other instance where this was happening.