Register Now

cuga · 02-25-2009, 06:16 AM

Quote:

Originally Posted by Rbeal31

I just dont see how you can do it without shortening the wires...that being said this was my first honest try at a clean heli...

mirrored photo?

MrCLoWnY · 02-25-2009, 08:45 AM

You can wire the wires pretty cleanly without cutting it.. I'll post mine up later today.

Shef · 02-27-2009, 10:25 AM

I bought it used and just did a COMPLETE rebuild....surprisingly, I didn't strip the stock driver in the build...was just very careful. Next step is to throw on the Yellow Lightening bolt canopy to match my 500 and then modify some 450 GG skids...will post that when I'm done.

frogbmth · 03-01-2009, 02:22 PM

I flew a friend's 250 today, what fun these helis are!

mflander · 03-02-2009, 10:13 AM

Hey Shef, where do you get those servo lead covers you are using?!?

Shef · 03-02-2009, 10:17 AM

You mean the servo braid? It's Flex Cut 1/8th inch. Totally the best!

http://www.techflex.com/prod_CCP.asp

mflander · 03-02-2009, 10:22 AM

Thanks...

Shef · 03-02-2009, 10:27 AM

Bought it from https://www.wirecare.com/
...also bought the 1/4" 3/1 heatshrink tubing https://www.wirecare.com/products.asp?prodline=H3

credit goes to Rick Lohr for showing me the light!

My 2 Cents · 03-08-2009, 05:43 AM

Well here is mine. About the only thing you can't see in the pic is the pinion which is a 15t/0.4 mod 2.3mm pinion with set screw... very nice no more loctite..

Enjoy
My 2 Cents

Rollin_3z · 03-08-2009, 12:39 PM

Go big or go home, look at the size of those packs.

Like the canopy.

My 2 Cents · 03-08-2009, 04:48 PM

Quote:

Originally Posted by Rollin_3z

Go big or go home, look at the size of those packs.

Like the canopy.

Thanks but that is the American way " Do it Big"... They are 10s 3700's I have 2 10s 4200's on the way... those should be as big as the 250 is....

What do you guys think about the litttle Micro T under the 250 maybe I should take the landing gear off and replace it with that.

Thanks Again
My 2 Cents

helidude3 · 03-08-2009, 06:30 PM

That would be sweet, a flying micro-t LOL. You are too lazy to go and retrieve you heli yourself, so you just switch controllers and drive it over to you. I think it might work, but I am not sure how heavy it is, I doubt the heli could lift more than 2 ounces without major bogging.

Jetleaf · 03-08-2009, 07:05 PM

Nice pix My 2 cents, you have got to get the 250 canopy done up like the 600's. Smokin canopy btw. Is it custom Canomod? It doesn't look like one of their standard canopies.

My 2 Cents · 03-08-2009, 07:37 PM

Thanks for the commennts it was 100 bucks from Helidirect last month. Only one they had.. just clickked order nothing to custom about that lol. I wish they would actually make more 250 canomods then the handfull of adiquit ones they do noow... Maybe I could take them both to a Airbrush artest and have them copy it over for me.

My 2 Cents

OICU812 · 03-11-2009, 05:02 AM

Did a few upgrades.
Infinity CF boom, Infinity CF landing gear, Metal bearing blocks and the metal front and rear pullies, metal tr servo clamps

Rollin_3z · 03-11-2009, 05:58 AM

Yes it looks sharp. Want to get a CF boom...

fiveoboy01 · 03-11-2009, 01:27 PM

I've been lookin at the metal bearing blocks.... Out of stock from my preferred supplier at the moment. I do also have the metal tail servo mounts which are WAY better than the stock plastic ones.

Shawn what tail servo are you using?

yossi1853 · 03-11-2009, 03:48 PM

Wow! very nice heli!
Were can I find the CF skids and boom?

gravydrive · 03-11-2009, 07:01 PM

Quote:

Originally Posted by fiveoboy01

I've been lookin at the metal bearing blocks.... Out of stock from my preferred supplier at the moment. I do also have the metal tail servo mounts which are WAY better than the stock plastic ones.

Shawn what tail servo are you using?

That's a 3500G in the photo.

OICU812 · 03-11-2009, 07:11 PM

Infinity Hobby carries the CF booms and the CF landing gear.

02-25-2009, 08:45 AM	#262 (permalink)
MrCLoWnY Registered Users Join Date: Jul 2008	You can wire the wires pretty cleanly without cutting it.. I'll post mine up later today. __________________ T-Rex 600 NSP \| YS 50 w/MP5 SB \| Futaba GY611 w/BLS251 & BLS451 x4 \| Flight Log: 5 gallons! & 1.5 Crash \| ROTORTECH QUALITY SUX! T-Rex 450 SE V2 \| Scorpion 2221-8 / 60 AMP ESC V2 \| Align GP750/S9257 \| HiTEC 65MG @ 6 volts \| KBDD Tail Blade \| ROTORTECH QUALITY SUX! T-Rex 250 \| DS410 x3 \| GP750 Gyro w/ 3500G \| 205D CF \| DS420SUCKS!!! \|

02-27-2009, 10:25 AM	#263 (permalink)
Shef Registered Users My HF Map location Join Date: Jul 2008	Here's mine I bought it used and just did a COMPLETE rebuild....surprisingly, I didn't strip the stock driver in the build...was just very careful. Next step is to throw on the Yellow Lightening bolt canopy to match my 500 and then modify some 450 GG skids...will post that when I'm done. Attached Thumbnails __________________ Former owner of T-Rex: 250, 450 V2, 500ESP V-Bar, 550 DFC 3GX, 600ESP V-Bar, 700E 3G

03-01-2009, 02:22 PM	#264 (permalink)
frogbmth Registered Users My HF Map location Join Date: Sep 2007	I flew a friend's 250 today, what fun these helis are! __________________ Outrage G5 Skookum Flybarless T-Rex 500esp V-Bar flybarless Outrage 550 - T-Rex 600 Nitro Pro DMHC

03-02-2009, 10:17 AM	#266 (permalink)
Shef Registered Users My HF Map location Join Date: Jul 2008	You mean the servo braid? It's Flex Cut 1/8th inch. Totally the best! http://www.techflex.com/prod_CCP.asp __________________ Former owner of T-Rex: 250, 450 V2, 500ESP V-Bar, 550 DFC 3GX, 600ESP V-Bar, 700E 3G

03-02-2009, 10:27 AM	#268 (permalink)
Shef Registered Users My HF Map location Join Date: Jul 2008	Bought it from https://www.wirecare.com/ ...also bought the 1/4" 3/1 heatshrink tubing https://www.wirecare.com/products.asp?prodline=H3 credit goes to Rick Lohr for showing me the light! __________________ Former owner of T-Rex: 250, 450 V2, 500ESP V-Bar, 550 DFC 3GX, 600ESP V-Bar, 700E 3G

03-02-2009, 10:13 AM	#265 (permalink)
mflander Registered Users Join Date: Jan 2008	Hey Shef, where do you get those servo lead covers you are using?!?

03-02-2009, 10:22 AM	#267 (permalink)
mflander Registered Users Join Date: Jan 2008	Thanks...

03-08-2009, 05:43 AM	#269 (permalink)
My 2 Cents Registered Users Join Date: Jul 2008	Well here is mine. About the only thing you can't see in the pic is the pinion which is a 15t/0.4 mod 2.3mm pinion with set screw... very nice no more loctite.. Enjoy My 2 Cents Attached Thumbnails

03-08-2009, 12:39 PM	#270 (permalink)
Rollin_3z Registered Users Join Date: Jan 2009	Go big or go home, look at the size of those packs. Like the canopy.

03-08-2009, 06:30 PM	#272 (permalink)
helidude3 Registered Users My HF Map location Join Date: Jan 2009	That would be sweet, a flying micro-t LOL. You are too lazy to go and retrieve you heli yourself, so you just switch controllers and drive it over to you. I think it might work, but I am not sure how heavy it is, I doubt the heli could lift more than 2 ounces without major bogging. __________________ T-rex 250 Super Combo w/ hs-65mg's Blade cp pro: spectrum receiver, BL main, DD tail, Gyro www.bladecpupgrades.co.nr Blade cx2 E-flite 4-site

03-08-2009, 07:05 PM	#273 (permalink)
Jetleaf Registered Users Join Date: Jan 2008	Nice pix My 2 cents, you have got to get the 250 canopy done up like the 600's. Smokin canopy btw. Is it custom Canomod? It doesn't look like one of their standard canopies. __________________ I put the "__" in lazy

03-08-2009, 07:37 PM	#274 (permalink)
My 2 Cents Registered Users Join Date: Jul 2008	Thanks for the commennts it was 100 bucks from Helidirect last month. Only one they had.. just clickked order nothing to custom about that lol. I wish they would actually make more 250 canomods then the handfull of adiquit ones they do noow... Maybe I could take them both to a Airbrush artest and have them copy it over for me. My 2 Cents

03-11-2009, 05:02 AM	#275 (permalink)
OICU812 Registered Users My HF Map location Join Date: Oct 2005 Location: Grande Prairie, Alberta	Did a few upgrades. Infinity CF boom, Infinity CF landing gear, Metal bearing blocks and the metal front and rear pullies, metal tr servo clamps __________________ ...Once upon a time there were Nitros, flybars & frequency pins...Shawn

03-11-2009, 05:58 AM	#276 (permalink)
Rollin_3z Registered Users Join Date: Jan 2009	Yes it looks sharp. Want to get a CF boom...

03-11-2009, 01:27 PM	#277 (permalink)
fiveoboy01 Registered Users My HF Map location Join Date: Sep 2007 Location: Madison, WI	I've been lookin at the metal bearing blocks.... Out of stock from my preferred supplier at the moment. I do also have the metal tail servo mounts which are WAY better than the stock plastic ones. Shawn what tail servo are you using? __________________ Dirty B - LARCC/RRAMS/MARCS *FLEET:* Blade 150S

03-11-2009, 03:48 PM	#278 (permalink)
yossi1853 Registered Users Join Date: Feb 2009	Wow! very nice heli! Were can I find the CF skids and boom?

03-11-2009, 07:11 PM	#280 (permalink)
OICU812 Registered Users My HF Map location Join Date: Oct 2005 Location: Grande Prairie, Alberta	Infinity Hobby carries the CF booms and the CF landing gear. __________________ ...Once upon a time there were Nitros, flybars & frequency pins...Shawn

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in