Motor shutting off in flight, caused 2 crashes!

[rcmarty]

The 2s lipo (charged to a resting voltage of 8v) can be plugged into any open port.

A Y connector would do the same thing also.

Either way is good , as the buss is all 1 voltage.



I'd think a fully charged lipo ( 8.4v ) is going to give an error in the kos log.

Martin

[gtrsteele]

I'm using the BD and MKS X8 servos running off a 2s lipo straight into two ports on the BD. I did use a heavier gauge wire for two leads coming off the main battery leads of the 2s lipo. I've never had a problem. This is on a Goblin 770 using a Castle Edge HV 160 running a Quantum 4530-500 motor.

[ah_liang]

I never put all hopes on a 2s pack. It will be a 3s pack thru a BEC. One of my friend had his heli went down as one cell drop dead in the middle of his flight.

[Helicentrik]

I've got all my electrics set to 7.4 and I have the Scott Gray Reactor HVX. I have a 3s 1300 going in to it.