Register Now

The Ogar · 05-06-2015, 05:51 AM

I am very new to this hobby and would like to know if yall could help me. Since being new I went with a used Heli. I recieved my blade 120 on monday. Charded all the batteries and started playing with the controls last night. It seems likethe servo push rod is stuck in the up position. I can tell it has been crased before. up on trying to take off it will go to the left and fall over. I took off the canopy and the right servo push rod is moving up and down but the left is stuck in the upright postion. I am assuming that I will need a new servo just trying to make sure before going into a hobby shop with some questions. Thanks for your help.

Pfloyd · 05-06-2015, 12:31 PM

Check the little white gears on the bottom of the offending servo and check for dirt or bad tooth.

oliver1071 · 05-06-2015, 12:47 PM

Could just be unplugged some of my micro's have had the plugs work out a little and stop moving. Still looks like they're plugged in they're just up enough to break the connection.

Pfloyd · 05-06-2015, 03:50 PM

Quote:

Originally Posted by oliver1071

Could just be unplugged some of my micro's have had the plugs work out a little and stop moving. Still looks like they're plugged in they're just up enough to break the connection.

There are no plugs on the servos on the 120sr. The wires are soldered!

oliver1071 · 05-06-2015, 05:19 PM

Quote:

Originally Posted by Pfloyd

There are no plus on the servos on the 120sr. The wires are soldered!

Wow that's strange

The Ogar · 05-07-2015, 12:05 PM

The gears move fine. looks like all connections are there. when moving the gears on the right one it moves the bar up and down. On the left it does not move. but when to told to move on the controller they do not spin like the right. thanks for all y'alls help.

nmsuman · 05-08-2015, 03:24 AM

Quote:

Originally Posted by The Ogar

The gears move fine. looks like all connections are there. when moving the gears on the right one it moves the bar up and down. On the left it does not move. but when to told to move on the controller they do not spin like the right. thanks for all y'alls help.

Sounds like the servo motor is blown. If it were dirt it might have atleast moved in one direction (opposite the dirt).

05-06-2015, 05:51 AM	#1 (permalink)
The Ogar Registered Users Join Date: May 2015	newbie question I am very new to this hobby and would like to know if yall could help me. Since being new I went with a used Heli. I recieved my blade 120 on monday. Charded all the batteries and started playing with the controls last night. It seems likethe servo push rod is stuck in the up position. I can tell it has been crased before. up on trying to take off it will go to the left and fall over. I took off the canopy and the right servo push rod is moving up and down but the left is stuck in the upright postion. I am assuming that I will need a new servo just trying to make sure before going into a hobby shop with some questions. Thanks for your help.

05-06-2015, 12:31 PM	#2 (permalink)
Pfloyd Registered Users Join Date: Mar 2010	Check the little white gears on the bottom of the offending servo and check for dirt or bad tooth. Attached Thumbnails __________________ Syma S107-Syma S109-Syma X8C-Syma X8G-Syma X5HC-Syma X5HW-Mini Orion-ProtoX-Syma X5C-1 USAF RETIRED 1968-1988 Vietnam Veteran

05-06-2015, 12:47 PM	#3 (permalink)
oliver1071 Registered Users Join Date: Mar 2011	Could just be unplugged some of my micro's have had the plugs work out a little and stop moving. Still looks like they're plugged in they're just up enough to break the connection. __________________ __________ Goblin 380, 500, 570, Mikado 690SX, 480Xx(Stretched 500) , Protos Mini, Max V2 , Oxy 3, Vbar Control/Neo Vlink (Citizen 758)YouTubeProgress:http://tinyurl.com/oliver1071

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-07-2015, 12:05 PM	#6 (permalink)
The Ogar Registered Users Thread Starter Join Date: May 2015	The gears move fine. looks like all connections are there. when moving the gears on the right one it moves the bar up and down. On the left it does not move. but when to told to move on the controller they do not spin like the right. thanks for all y'alls help.

Register Now

Log-in