Register Now

hsamuel · 04-01-2009, 04:52 PM

Selling my beloved Trex 450 SE V1, it is in excellent condition. I bought the heli 6 months ago and rebuilt it from the ground up. I replaced the main shaft, all the main shaft bearings, main shaft lock ring, feathering shaft, feathering shaft bearings, main blade screws and bolts, o-ring dampers, SF mixing arms, the one-way bearing and one-way bearing shaft, tail rotor shaft, rotor holder bearings, changed all the linkage balls to V2 steel balls and installed a 11T steel pinion gear. It has new carbon flybar paddles, tail rotor blades, and horizontal and vertical stabilizers, and carbon-look fiberglass canopy. Meticulously built with loctite on all metal-metal screws. She is one pretty bird! I simply do not have the time to figure out the CCPM setup on the transmitter, and need the cash for other things at this point in my life. My loss is your gain..

Comes with:

3x Hitec HS-56HB servos
Futaba S9650 digital tail servo
Telebee head lock gyro
Align 35G ESC
Align 430L motor
Futaba 7CAP Transmitter with wall charger and manual
Futaba R168DF 8 Channel AND Futaba R146iP PCM recievers
1x Flightpower EVO25 2170 mAh 3s 11.1V LiPo (barely used)
Triton Jr. Charger (brand new in box) with battery connector and manual

Also included are a ton of new parts and tools:

1x new Align 325 Pro wood main blades
1x new Align 335 Pro wood main blades
HS-56HB Karbonite gear set
Ch.52 Futaba Rx crystal
3x main shafts
12T and 13T "Rhino Gear" steel pinion gears
2x head dampeners
1x one-way bearing
2x feathering shafts
3x Align magnetic rings
4x Jesus bolt main shaft screws
1x Align hardware bag
1x Align tail boom
1x tail linkage rod set
2x tail servo mounts
2x main shaft bearings
1x linkage rod set
1x ball link eyes set
2x tail rotor shafts
2x blue anodized frame screw washer sets

Blade tracking tape
Blade holder
2x 1.5mm hex drivers
Trueblood swashplate leveling tool
Align one-way bearing removal tool
4.8mm ball link sizing tool
Align blade balancer
Pitch guage
Ball link pliers
Blue thread lock
Silicone oil (used as tail belt lube)

I am asking USD $700 obo for everything listed above, shipping included. This is a great opportunity to get everything you need to fly in one shot!

hsamuel · 04-03-2009, 01:44 PM

BUMP!

Price reduced to USD $600 for the entire package with shipping included! Anyone interested?

hsamuel · 04-15-2009, 04:17 PM

BUMP!

Priced lowered to $550 USD!

mg73397 · 04-16-2009, 12:14 AM

still for sale

hsamuel · 04-16-2009, 02:52 PM

Yes, its still for sale. Shoot me an offer..

mg73397 · 04-16-2009, 07:57 PM

my wife said i can spend 450 thats all i got what do u think

mg73397 · 04-18-2009, 09:56 PM

sam u still around

hsamuel · 04-19-2009, 01:59 PM

Hi Mike, PM sent your way

hsamuel · 04-21-2009, 02:34 PM

Hey Mike,

Sent another PM yesterday, just making sure you get it..

hsamuel · 04-23-2009, 01:28 PM

Hey Mike,

Paypal invoice sent on Tuesday

hsamuel · 04-26-2009, 09:27 PM

PM sent.

hs748 · 04-26-2009, 09:32 PM

still for sale?

hsamuel · 04-27-2009, 03:34 PM

Yes its still for sale. I had a sale pending but I have not received an answer in over a week, so shoot me a PM if you're interested!

hsamuel · 05-08-2009, 03:31 PM

BUMP! Still for sale guys, due to 2 people unable to come up with the money!

hsamuel · 05-26-2009, 02:39 PM

Due to people being unable to come up with the funds at the last minute, this heli is still for sale. BUMP!

04-01-2009, 04:52 PM	#1 (permalink)
hsamuel Join Date: Jun 2008	Trex 450SE V1 with upgrades, charger, Tx, battery - RTF! Selling my beloved Trex 450 SE V1, it is in excellent condition. I bought the heli 6 months ago and rebuilt it from the ground up. I replaced the main shaft, all the main shaft bearings, main shaft lock ring, feathering shaft, feathering shaft bearings, main blade screws and bolts, o-ring dampers, SF mixing arms, the one-way bearing and one-way bearing shaft, tail rotor shaft, rotor holder bearings, changed all the linkage balls to V2 steel balls and installed a 11T steel pinion gear. It has new carbon flybar paddles, tail rotor blades, and horizontal and vertical stabilizers, and carbon-look fiberglass canopy. Meticulously built with loctite on all metal-metal screws. She is one pretty bird! I simply do not have the time to figure out the CCPM setup on the transmitter, and need the cash for other things at this point in my life. My loss is your gain.. Comes with: 3x Hitec HS-56HB servos Futaba S9650 digital tail servo Telebee head lock gyro Align 35G ESC Align 430L motor Futaba 7CAP Transmitter with wall charger and manual Futaba R168DF 8 Channel AND Futaba R146iP PCM recievers 1x Flightpower EVO25 2170 mAh 3s 11.1V LiPo (barely used) Triton Jr. Charger (brand new in box) with battery connector and manual Also included are a ton of new parts and tools: 1x new Align 325 Pro wood main blades 1x new Align 335 Pro wood main blades HS-56HB Karbonite gear set Ch.52 Futaba Rx crystal 3x main shafts 12T and 13T "Rhino Gear" steel pinion gears 2x head dampeners 1x one-way bearing 2x feathering shafts 3x Align magnetic rings 4x Jesus bolt main shaft screws 1x Align hardware bag 1x Align tail boom 1x tail linkage rod set 2x tail servo mounts 2x main shaft bearings 1x linkage rod set 1x ball link eyes set 2x tail rotor shafts 2x blue anodized frame screw washer sets Blade tracking tape Blade holder 2x 1.5mm hex drivers Trueblood swashplate leveling tool Align one-way bearing removal tool 4.8mm ball link sizing tool Align blade balancer Pitch guage Ball link pliers Blue thread lock Silicone oil (used as tail belt lube) I am asking USD $700 obo for everything listed above, shipping included. This is a great opportunity to get everything you need to fly in one shot! Attached Thumbnails

05-26-2009, 02:39 PM	#15 (permalink)
hsamuel Thread Starter Join Date: Jun 2008	Bump Due to people being unable to come up with the funds at the last minute, this heli is still for sale. BUMP!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-03-2009, 01:44 PM	#2 (permalink)
hsamuel Thread Starter Join Date: Jun 2008	BUMP! Price reduced to USD $600 for the entire package with shipping included! Anyone interested?

04-15-2009, 04:17 PM	#3 (permalink)
hsamuel Thread Starter Join Date: Jun 2008	BUMP! Priced lowered to $550 USD!

04-16-2009, 12:14 AM	#4 (permalink)
mg73397 Registered Users Join Date: Apr 2009	still for sale

04-16-2009, 02:52 PM	#5 (permalink)
hsamuel Thread Starter Join Date: Jun 2008	Yes, its still for sale. Shoot me an offer..

04-16-2009, 07:57 PM	#6 (permalink)
mg73397 Registered Users Join Date: Apr 2009	my wife said i can spend 450 thats all i got what do u think

04-18-2009, 09:56 PM	#7 (permalink)
mg73397 Registered Users Join Date: Apr 2009	sam u still around

04-19-2009, 01:59 PM	#8 (permalink)
hsamuel Thread Starter Join Date: Jun 2008	Hi Mike, PM sent your way

04-21-2009, 02:34 PM	#9 (permalink)
hsamuel Thread Starter Join Date: Jun 2008	Hey Mike, Sent another PM yesterday, just making sure you get it..

04-23-2009, 01:28 PM	#10 (permalink)
hsamuel Thread Starter Join Date: Jun 2008	Hey Mike, Paypal invoice sent on Tuesday

04-26-2009, 09:27 PM	#11 (permalink)
hsamuel Thread Starter Join Date: Jun 2008	PM sent.

04-26-2009, 09:32 PM	#12 (permalink)
hs748 Registered Users Join Date: Jun 2007	still for sale?

04-27-2009, 03:34 PM	#13 (permalink)
hsamuel Thread Starter Join Date: Jun 2008	Yes its still for sale. I had a sale pending but I have not received an answer in over a week, so shoot me a PM if you're interested!

05-08-2009, 03:31 PM	#14 (permalink)
hsamuel Thread Starter Join Date: Jun 2008	BUMP! Still for sale guys, due to 2 people unable to come up with the money!

Register Now

Log-in