START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Others Walkera Other Models Helicopter Support |
|
LinkBack | Thread Tools | Display Modes |
04-03-2012, 05:56 PM | #1 (permalink) |
Registered Users
Join Date: Jan 2012
|
Tail servo distance - CB180Z
Can someone give me the distance that the mounting bracket that wraps around the tail boom should be from the tail boom mount in the heli? I busted my tail servo again.......... it appears the mount that servo mounts has moved forward. I know when I install the new servo that the horn has to be perpendicular to the tail boom but there must a distance for the cradle that holds the servo.
Thank you!! |
Sponsored Links | |||
Advertisement |
|
04-28-2012, 06:56 AM | #2 (permalink) |
Registered Users
Join Date: Apr 2012
|
I don't think there is a specification for this. I ran into the same question after my first repair requiring removal of the tail. I ended up simply sliding the servo back and forth using test flights until my Helli stopped rotating to get it in the ballpark then I made my final adjustments. I am about to overhaul my helicopter - if I remember I will post where my servo is positioned.
|
Thread Tools | |
Display Modes | |
|
|