Register Now

galesc · 05-09-2012, 10:36 PM

All,

I broke the mount for the tail motor and was wondering if I could just get a replacement or the mount alone. I have already extended the tail with 2mm solid carbon. Any ideas?

Thanks,

Casey

tommy217xxx · 05-09-2012, 10:47 PM

Check out asteroid.

Astroid Designs — Blade MCPx Upgrades

dahli.llama · 05-10-2012, 08:53 AM

I use the Rakon aluminum tail mount. It's pretty slick.

tembit · 05-14-2012, 12:53 PM

The Rakon Heli tail motor mounts seem to be hard to come by. How do they compare to the Astroid motor mounts?

I recently started flying with a 2mm carbon rod I cut to size from my old CX2 training gear. While the rod has survived numerous crashes without a scratch - I'm working on inverted flight - the stock motor mount eventually falls apart.

Given the limitations of my soldering skills, I'll probably stick with the stock motor. I haven't had any tail blowouts when performing rolls and flips... yet.

Thanks!

05-09-2012, 10:36 PM	#1 (permalink)
galesc Registered Users Join Date: Mar 2012	Tail Motor Mount Replacement All, I broke the mount for the tail motor and was wondering if I could just get a replacement or the mount alone. I have already extended the tail with 2mm solid carbon. Any ideas? Thanks, Casey

05-09-2012, 10:47 PM	#2 (permalink)
tommy217xxx Registered Users Join Date: Mar 2011	Check out asteroid. Astroid Designs — Blade MCPx Upgrades __________________ MCPX BL(#1 V1 Hp05s/120SR tail, V1 C05m/Dual coreless tail) Nano cpx stock Trex 450 Pro, Spektrum Dx6i, Phoenix

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

05-10-2012, 08:53 AM	#3 (permalink)
dahli.llama Registered Users My HF Map location Join Date: Nov 2010	I use the Rakon aluminum tail mount. It's pretty slick.

05-14-2012, 12:53 PM	#4 (permalink)
tembit Registered Users Join Date: Jun 2008	The Rakon Heli tail motor mounts seem to be hard to come by. How do they compare to the Astroid motor mounts? I recently started flying with a 2mm carbon rod I cut to size from my old CX2 training gear. While the rod has survived numerous crashes without a scratch - I'm working on inverted flight - the stock motor mount eventually falls apart. Given the limitations of my soldering skills, I'll probably stick with the stock motor. I haven't had any tail blowouts when performing rolls and flips... yet. Thanks!

Register Now

Log-in