Fun, Learning, Friendship and Mutual Respect
START  HERE


Unregistered
Go Back   HeliFreak > R/C Electronics Support > Futaba Radios and Electronics


Futaba Radios and Electronics Futaba Radios, Gyros, Servos, Etc.


Reply
 
Thread Tools Display Modes
Old 07-15-2012, 07:13 AM   #1
varacer
Registered Users
 

Join Date: Nov 2010
Location: Chesterfield, VA
Default need help picking which rx

Ok the radio is the 8fg heli is a 700n with vbar. Trying to figure out which rx to use with a gov which the gain has to be on ch7 or 8.

So does that mean the 3 ch sbus rx is out? If I get the 8ch sbus and use the sbus for the vbar can I use the open channels that are sent out over the sbus for something else?
varacer is offline        Reply With Quote
Old 07-16-2012, 01:24 PM   #2
cbane
Registered Users
 

Join Date: Mar 2011
Location: Huntsville, AL, USA
Default

I'm not familiar with Vbar, is it possible to customize the channel ordering (both the Futaba CGY-750 and the BeastX can do it)? If it's possible, you can move the governor output to channel 1-3, move whatever was already on that channel to the channel the governor was on, and then set up the Vbar to match.

Another option would be to use the built-in governor in the Vbar, if it works with nitro helis.

Either of these would let you use the R6203SB.
cbane is offline        Reply With Quote
Old 07-16-2012, 03:12 PM   #3
dkpodder
Registered Users
 

Join Date: Jul 2006
Location: Denmark
Default

Quote:
Originally Posted by cbane View Post
I'm not familiar with Vbar, is it possible to customize the channel ordering (both the Futaba CGY-750 and the BeastX can do it)?
Yes, it is possible, no problem.

Quote:
Originally Posted by cbane View Post
Another option would be to use the built-in governor in the Vbar, if it works with nitro helis.
Yes it does, very well in fact.
dkpodder is online now        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Electronics Support > Futaba Radios and Electronics


Futaba Radios and Electronics Futaba Radios, Gyros, Servos, Etc.

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com