Joe Nall 9May2014 - 18May 2014

[Jermo]

http://www.tripletreeaerodrome.com/joe-nall-week.php

Robin and I will be there the 2nd weekend hopefully arriving Friday 23 May after 5pm sometime. We plan to camp Friday and Saturday Night.

I hope to see all of you there!
Jer

[whirlybird 1]

Ill see you there Jermo. Bring your Pantera fleet
Mike

[z_man_95]

I wish, as it would be nice. But alas, I must work.

[Jermo]

I'll break out the soldering tools and finish up. The only thing I'm debating are the servos on my EPantera. The cyclics are Futaba 9252's (from memory) but everything else is HV compatible (Promodeler gyro/tail servo combo, Promodeler ESC). I'm heavily debating swapping out the cyclics so there's lower risk of burning out the Futabas (not rated beyond 4.8),

I'm thinking I can just swap them out and not have to change any settings since the servo arms are compatible as long as I center the new ones before installing the arms..

thoughts?

[Dr. M]

Originally Posted by Jermo

I'll break out the soldering tools and finish up. The only thing I'm debating are the servos on my EPantera. The cyclics are Futaba 9252's (from memory) but everything else is HV compatible (Promodeler gyro/tail servo combo, Promodeler ESC). I'm heavily debating swapping out the cyclics so there's lower risk of burning out the Futabas (not rated beyond 4.8),

I'm thinking I can just swap them out and not have to change any settings since the servo arms are compatible as long as I center the new ones before installing the arms..

thoughts?

Sounds good theoretically, and swapping servos is certainly easier to do with a FB model than FBL, but you may still have to check travels, pitch ranges, and ensure there's no binding in the corners.

[whirlybird 1]

Jermo
Do you have a picture(s) of how you mounted your ESC and wiring on your P-6. Would like to look at them to see how you wired and mounted everything.
Had a set back with my fly barless controller and have to send it back, unit failed and I don't know why. Hopefully get a new one in time for JN.
See you at JN.
Mike

[Jermo]

if you aren't flying by the time we get to Joe Nall you can fly mine