Register Now

bugsmasher · 12-13-2011, 11:45 AM

I bought a 3s transmitter lipo for my 7C. The way I figure it the 9.6 volt pack that came with the transmitter would actually be about 8x1.4volts = 11.2 volts fully charged where as the lipo would be 3x4.2 volts = 12.6 volts fully charged. Is this too much voltage for this transmitter? Thanks for any input.

gelatmi1 · 12-13-2011, 01:20 PM

On my old T9ZAP i have a 3s lipo pack and it works very well. No problem at all !!!
Also other people at the field use 3s and all is fine.

kingmeow · 12-13-2011, 03:15 PM

I have a 7C that uses a 3S, 2500 mAh lipo and it works great! Nothing like 10 hours of run time before recharging!

bugsmasher · 12-13-2011, 03:17 PM

Thanks for the info guys. I thought about charging to the storage charge of 11 volts but that kind of defeats the purpose of having a lipo in it.

gbidwell · 12-13-2011, 04:38 PM

get a life pack...lipos dont like being stored at full charge. They lose 20% capacity per year at full charge. Life packs dont care and can be deaply discharged and Have a lower voltage.

Hyperion 2100mAh TX LifePo4 pack...thats what I use. 10 hours run time no worries.

pinguin · 03-02-2012, 04:28 AM

I also use LiFe batt from HK, but only at 1800mah.
The question is, how low can I discharge this battery? I think this battery is rated at 3 - 3.3v, so I can use it until 9v. Is it correct?
What is the lowest working voltage for 7C ?

12-13-2011, 11:45 AM	#1 (permalink)
bugsmasher Registered Users Join Date: Jul 2009	Futaba 7C Lipo Question I bought a 3s transmitter lipo for my 7C. The way I figure it the 9.6 volt pack that came with the transmitter would actually be about 8x1.4volts = 11.2 volts fully charged where as the lipo would be 3x4.2 volts = 12.6 volts fully charged. Is this too much voltage for this transmitter? Thanks for any input.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

12-13-2011, 01:20 PM	#2 (permalink)
gelatmi1 Registered Users Join Date: May 2006	On my old T9ZAP i have a 3s lipo pack and it works very well. No problem at all !!! Also other people at the field use 3s and all is fine.

12-13-2011, 03:15 PM	#3 (permalink)
kingmeow Registered Users Join Date: Jul 2011	I have a 7C that uses a 3S, 2500 mAh lipo and it works great! Nothing like 10 hours of run time before recharging!

12-13-2011, 03:17 PM	#4 (permalink)
bugsmasher Registered Users Thread Starter Join Date: Jul 2009	Thanks for the info guys. I thought about charging to the storage charge of 11 volts but that kind of defeats the purpose of having a lipo in it.

12-13-2011, 04:38 PM	#5 (permalink)
gbidwell Registered Users Join Date: Apr 2010	get a life pack...lipos dont like being stored at full charge. They lose 20% capacity per year at full charge. Life packs dont care and can be deaply discharged and Have a lower voltage. Hyperion 2100mAh TX LifePo4 pack...thats what I use. 10 hours run time no worries.

03-02-2012, 04:28 AM	#6 (permalink)
pinguin Registered Users Join Date: Apr 2009	I also use LiFe batt from HK, but only at 1800mah. The question is, how low can I discharge this battery? I think this battery is rated at 3 - 3.3v, so I can use it until 9v. Is it correct? What is the lowest working voltage for 7C ?

Register Now

Log-in