Register Now

bladerunner210 · 07-13-2013, 01:46 PM

Need some help here guys. Okay Im fixing my friends 450x with the 3gx setup on it and I'm in dir mode right trying to get the pitch set up right. When I throttle all the full positve i get a +12 and all the way negative i get -11.3 I have lowered and raised the swash its either to high or to low. What are the measurement for the servo pushrods for the blade 450x or should I use the length of the align 450

bladerunner210 · 07-16-2013, 04:48 PM

anyone??

crashcopterman · 07-16-2013, 06:22 PM

Live with it, my 450 3D is the same way, not a biggie and you probably will not notice it at all.

FailureToFly · 07-16-2013, 07:51 PM

You need the swash tool to get the height...someone would have posted the mm though...I can't help you as I'm running aftermarket servos.

You can get loads of pitch if you like...it would be easy to set +/-15 degrees but you'd get binding. I set about +/- 12.5 and I'm Blue in Setup L.

Crakin · 07-16-2013, 08:01 PM

Rough inside measurements
21.5mm ele
27.5mm ali
14.5mm aux

Ball to ball
45.5mm ele
50.5mm ail
39.5mm aux

+/- 1.5mm

07-13-2013, 01:46 PM	#1 (permalink)
bladerunner210 Registered Users Join Date: Jul 2012	Need Help Please!! Need some help here guys. Okay Im fixing my friends 450x with the 3gx setup on it and I'm in dir mode right trying to get the pitch set up right. When I throttle all the full positve i get a +12 and all the way negative i get -11.3 I have lowered and raised the swash its either to high or to low. What are the measurement for the servo pushrods for the blade 450x or should I use the length of the align 450 __________________ You Shine! I Shine! We all Shine! Oh it helps to if you switch into IU!!!

07-16-2013, 04:48 PM	#2 (permalink)
bladerunner210 Registered Users Thread Starter Join Date: Jul 2012	anyone?? __________________ You Shine! I Shine! We all Shine! Oh it helps to if you switch into IU!!!

07-16-2013, 06:22 PM	#3 (permalink)
crashcopterman Registered Users Join Date: Feb 2012 Location: Grande Prairie, Alberta Canada	Live with it, my 450 3D is the same way, not a biggie and you probably will not notice it at all. __________________ Nano CPX \|\| 130X \|\| 230S II 450 3D converted to 450X \|\| 360CFX \|\| 480 Fusion II 550X \|\| Oxy 5 MEG \|\| ALeeS Rush 700 Evolution \|\| Goblin 770 Sport 'My flight style, determines my crash style"

07-16-2013, 07:51 PM	#4 (permalink)
FailureToFly Registered Users Join Date: Mar 2012	You need the swash tool to get the height...someone would have posted the mm though...I can't help you as I'm running aftermarket servos. You can get loads of pitch if you like...it would be easy to set +/-15 degrees but you'd get binding. I set about +/- 12.5 and I'm Blue in Setup L. __________________ 12S 4035-500 Gaui X5 Formula VBar, 6S 2520-1880 Gaui X3 AR7200BX, Phantom 3 Professional

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-16-2013, 08:01 PM	#5 (permalink)
Crakin Registered Users Join Date: Jan 2013	Rough inside measurements 21.5mm ele 27.5mm ali 14.5mm aux Ball to ball 45.5mm ele 50.5mm ail 39.5mm aux +/- 1.5mm

Register Now

Log-in