HK450-GT Alloy CCPM Trex 450 Compatible

[Kozzy_98]

Hello everyone. Let me start by introducing myself.

I am from Australia and I am 14 years of age. I got into RC through my love of electronics and with an ambition to develop my mechanical skills.

I have only recently finished building my HK450GT with the following:

Motor: Turnigy Typhoon 2215H
ESC: Turnigy Plush 40A
Cyclic Servos: HK939MG
Tail servo:HK933
Gyro: HK401b
Rx: Spektrum AR6210X

The maiden was a typical maiden of a CP heli, I crashed it
Only repairs I had to make were Blades and a Stripped main gear.
Now need to build up more courage and have another crack at it!

[satgod]

welcome to the hobby, it will grow to be your biggest addiction even over gaming and the internet.

stock up on booms, gears, blades and a few bearings as you can afford it and keep flying

[dfgipe]

Hi Kozzy, good advice from satgod. Get some spares so you're not sitting around waiting for the mailman. Blades, gears, tail shafts, booms, skids,etc., are my most broken parts when I plant one. I have boxes of this stuff in my heli room. If you're not flying you're not learning. My 24 year old son has the same heli I built for him at Christmas and it flies great. Sounds like you have a nice setup on yours, keep on it! Good luck.