Register Now

AndrewJHawes · 07-14-2011, 04:52 AM

I have a Logo 500se with Scorpion 4025-1100 motor, CC Ice 100LV and 6s 5000 battery. My tail has stock plastic tail blades on and I have Model Engines 550mm main blades on. I have been running with a 16tooth pinion at 2000 head speed, with stock vbar settings, but my tail is wagging slightly. I am only a basic sport level pilot, mainly flying circuits smoothly.
Is my head speed too high, or should I change from stock Logo 500 vbar settings for gain, or maybe change tail. As far as I can tell, everything is smooth, not binding at all. This is my first big heli after Beam and Dragonus, and would appreciate any ideas to fix the tail. Otherwise the initial hovers have been smooth and responsive.

AndrewJHawes · 07-14-2011, 04:54 AM

Forgot to say that tail servo is Aligh DS650 with CC BEC Pro to power vbar, which I have not changed settings on yet.

07-14-2011, 04:52 AM	#1 (permalink)
AndrewJHawes Registered Users My HF Map location Join Date: Jul 2008 Location: Melbourne, Victoria, Australia	Logo 500se tail wag - help please I have a Logo 500se with Scorpion 4025-1100 motor, CC Ice 100LV and 6s 5000 battery. My tail has stock plastic tail blades on and I have Model Engines 550mm main blades on. I have been running with a 16tooth pinion at 2000 head speed, with stock vbar settings, but my tail is wagging slightly. I am only a basic sport level pilot, mainly flying circuits smoothly. Is my head speed too high, or should I change from stock Logo 500 vbar settings for gain, or maybe change tail. As far as I can tell, everything is smooth, not binding at all. This is my first big heli after Beam and Dragonus, and would appreciate any ideas to fix the tail. Otherwise the initial hovers have been smooth and responsive.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-14-2011, 04:54 AM	#2 (permalink)
AndrewJHawes Registered Users Thread Starter My HF Map location Join Date: Jul 2008 Location: Melbourne, Victoria, Australia	Forgot to say that tail servo is Aligh DS650 with CC BEC Pro to power vbar, which I have not changed settings on yet.

Register Now

Log-in