>Gil Rothmayr 1St hands on the Fusion 50

[silverbullet]

Ok Guys, this is the first Vid from the Swiss_Team Outragepilot Gil.

i think it looks fantastic..

Setup is:

X-era Motor 4025-560,3Y
12T Pinion, (running lower Head Speed und still performing exelent.)
Jive 80HV
Mikado mini V-Staby.
12S 3300mha-25C Desire Power Lipos.
MS-Composite Campion Blades.

The temp after the flight ,was straight 33Degree Celcius (Motor-ESC and Lipo all the same
mesured with the Temp Gun.

Enjoi

[ame]http://www.youtube.com/watch?v=Er4fuqdA33U[/ame]

[HoffY]

Very nice silverbullet!

You say low head speed... may i ask roughly what speed that means? i'm thinking of running a very similar system to this one and would much rather lower headspeeds because i don't think you need ballistic head speed with larger heli's and still be able to lay it down. Get more flight time to boot.

[silverbullet]

it was around (2000rpm) , we was calculating it with a Headspeedcalculator programm.

12T Pinion and 560KV for the motor. on 12 S ESC open @ 70%

[chrlsdim]

2000t rpm rotor speed is not slow

on this video 1800 rpm

[YOUTUBE]
[ame]http://www.youtube.com/watch?v=RZuHdzco8sk&feature=related[/ame]

[silverbullet]

, please consider its not mesured with a laser just calculator prg,,
(By the way we stickbang the t-rex 600 with 2400rpm ) so 2000 is slow for me )

[im4711]

it is surprising how easy you can misjudge it by sound. I was running mine with 2400 and with 2100 -> both sounded almost th same and my first feeling was it is too slow. Reality 2400 is still way to fast. So I will dial it down a little bit this weekend.

[HoffY]

silverbullet,

Thanks for your estimate of head speed. Its great to hear you say it was around the exact same speeds i was hoping to hover in (pun intended! ).

If the pro's of yesteryear could fly how they did with those "low" head speeds and seeing your flight (which was really great stuff) just confirms it even more. I'll convert it into more air time.

[im4711]

Originally Posted by silverbullet

, please consider its not mesured with a laser just calculator prg,,
(By the way we stickbang the t-rex 600 with 2400rpm ) so 2000 is slow for me )

I would love keeping mine at 2400 rpm -> only issue I saw was that Outrage recommends max head speed of 2200. So I will dial ours down and see how it is doing. I might even run it about 2300 at the end.

Will set the TRex 600 the same with same electronics just to see how they compare in real.

[silverbullet]

one more from Gil, with more headspeed,, look bloody fast to me
[ame]http://www.youtube.com/watch?v=mFGRDWhzZQE[/ame]

[DominicD]

I like his flying style, very nice flying.

[akamullen]

Originally Posted by silverbullet

it was around (2000rpm) , we was calculating it with a Headspeedcalculator programm.

12T Pinion and 560KV for the motor. on 12 S ESC open @ 70%

When you say 560kv, what motor? the 4035-560kv?

[silverbullet]

Originally Posted by akamullen

When you say 560kv, what motor? the 4035-560kv?

Nope, the X-era 4025-3Y-560KV 8P,,the infos are at the beginning from this tread,
cheers