START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
550 Class Electric Helicopters 550 Class Electric Helicopters manufactured by Align, Tarot, SYMA, Airhog, Chaos, HK and similar. |
|
LinkBack | Thread Tools | Display Modes |
06-09-2012, 03:18 PM | #1 (permalink) |
Registered Users
Join Date: Jun 2012
|
please help with my wiring!! trex 550 fbl system
Hi, I've just starting flying helis again, so decided to upgrade my old trex 550 v1 with some up to date parts. I've ripped all motor esc n 3G fbl system out and replaced with 600mx, cc ice 100, cc bec pro and mini vbar.....only thing is now I'm left with mass of confusion :/ from what I've read this is what I've come up with.....please let me know what you think..?
|
Sponsored Links | |||
Advertisement |
|
06-09-2012, 05:37 PM | #2 (permalink) |
Registered Users
Join Date: Mar 2011
|
People say to get the ds650 or better. Might as well do it now while your doing all the upgrading.
__________________
MSH, Cyclone |
06-09-2012, 05:50 PM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Jun 2012
|
What's this rudder servo, well I'm not really the best flyer and Ive just spend 540pound already...think that will do for a while
I just need for someone to confirm this wiring will work ha |
06-09-2012, 07:02 PM | #4 (permalink) |
Registered Users
Join Date: Oct 2011
|
Do not cut esc lead. You show disconnecting red and black. Only disconnect red (middle) wire on (throttle) lead. Leave outside two connected.
Just take red out of servo connector fold it back and put heat shrink around it. That way you can still have it if you need it later. Again it's only the middle wire that needs disconnected.
__________________
Learning to walk was so much easier than learning to fly. |
06-09-2012, 07:19 PM | #5 (permalink) |
Registered Users
Thread Starter
Join Date: Jun 2012
|
Ok, cheers for that, glad i read this before i made the snip!
|
06-09-2012, 09:20 PM | #6 (permalink) |
Registered Users
Join Date: Oct 2011
|
Also the 620 works well for me. I have used it for a few months and progressed pretty good with it. I think it'll be a while before I outfly anything on my kit.
__________________
Learning to walk was so much easier than learning to fly. |
06-09-2012, 09:28 PM | #7 (permalink) |
Registered Users
|
I changed 620 to 650 but saw no difference. Also I confirm only disconnect red pore wire.
On the iPad again
__________________
AMA 954079. KG5BBF |
06-09-2012, 10:55 PM | #8 (permalink) | |
Registered Users
Join Date: Jun 2006
|
Take a look at the link here
Quote:
Wynn
__________________
Logo 550sx |
|
06-10-2012, 03:51 AM | #9 (permalink) |
Registered Users
Thread Starter
Join Date: Jun 2012
|
There some good stuff here fellas, thanks!
Yeah somebody told me before to disconnect the negative from esc throttle as well and use it as a common ground? I'm guessing there's no need for this then? |
06-10-2012, 11:29 AM | #10 (permalink) |
Registered Users
Join Date: Oct 2011
|
No need. Just the middle wire.
__________________
Learning to walk was so much easier than learning to fly. |
Tags |
cc bec pro, cc ice 100, mini vbar, trex 550 fbl, wiring |
Thread Tools | |
Display Modes | |
|
|