Walkera Mini CP HELP PLEASE?

[billyxwn]

I have recently move up to a Walkera 6 ch Mini CP helicopter. It's really giving me a headache right now because it just wouldn't fly right. I already made sure that the swash plate is levelled and that the servo arms are at 90* when the throttle is at zero. However, when I throttle up to the point where the Mini CP is able to hover, the servos constantly tips the swash plate over to the right and to the back. This causes to Mini CP to drift towards the back right direction right after take off (No AILE/ELEV trims where inputted). I tried using the trims to even things out but to no avail. The Mini CP will now drift towards the left and back. I thought the Mini CP was suppose to be able to have a relatively stable takeoff instead of drifting while takeoff occurs. I am really lost so much would be appreciated if anyone can provide any help/suggestions regarding the situation that I have with my Mini CP.

[fastblade]

don't take off slow... gotta pop it into the air....