START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Synergy Model Helicopters Synergy Model Helicopters Support |
|
LinkBack | Thread Tools | Display Modes |
06-25-2012, 09:34 AM | #1 (permalink) |
Registered Users
Join Date: Oct 2009
|
Synergy E7 Flight with Kevlar Belt
Here is a video shot of a Synergy E7 with the Kevlar Belt.
My setup is mild at best for sport performance flying. Equipment: Hacker 470kv 12s 4000's 40c Futaba CGY750 Castle 120 HV2 Western Robotic Hercules BEC @ 6v Cyclic: 3 Align DS610 Rudder: Futaba 256HV Rail Blades: 696mm Main Blades Rail Blades: 106mm Tail Blades Here is a video for your enjoyment. [ame]http://www.youtube.com/watch?v=GZk7scDzaFE&list[/ame] |
Sponsored Links | |||
Advertisement |
|
06-25-2012, 03:49 PM | #3 (permalink) |
Registered Users
Join Date: Dec 2010
|
Nigel, you could really trust this belt, I put over 175 flights on mine before changing it out for the TT. We were the first to try it out, because Quebec, Canada has very cold winters. It survived our cold winter and part of the hot summers. Mine, even after 175 flights, still looks like new.
__________________
Team Rail blades, Team Scorpion motors, V-Team |
06-25-2012, 04:05 PM | #4 (permalink) |
Registered Users
Thread Starter
Join Date: Oct 2009
|
So far I have about 20+ Flights on the belt. I have no complaints. I'm def not gentle with it. I try to treat it as bad as I can minus crashing the bird. It takes a beating.
|
Thread Tools | |
Display Modes | |
|
|