Register Now

crazy3d · 02-22-2015, 08:16 PM

Hey guys im using the hw 100 platinum esc (not the v3) with the beast x.
Im trying the governor mode but everytime i pass approx 49% throttle i get a red flashing light on the esc with a slight rpm drop and the rpm just stays the same all the way to 100%.

Any help on what i am doing wrong? Got it on gov low for a 1000kv motor 10 pole searching for 3500 rpm (stock goblin 380).

mverhorst · 02-23-2015, 12:12 AM

Have not got a manual, but I quess gov high is what you are aiming for...

Flashing red, doesn't that indicate full throttle?

crazy3d · 02-23-2015, 05:31 AM

After my calculations i came to the conclusion that i should use gov low but i can be wrong. Ill try it in gov high and see what it does.

I also dont think that i have reached full throttle at 48% as the manual states that gov activates at 60%.

02-22-2015, 08:16 PM	#1 (permalink)
crazy3d Registered Users Join Date: Nov 2008	HW 100 esc platinum gov issue. Hey guys im using the hw 100 platinum esc (not the v3) with the beast x. Im trying the governor mode but everytime i pass approx 49% throttle i get a red flashing light on the esc with a slight rpm drop and the rpm just stays the same all the way to 100%. Any help on what i am doing wrong? Got it on gov low for a 1000kv motor 10 pole searching for 3500 rpm (stock goblin 380).

02-23-2015, 12:12 AM	#2 (permalink)
mverhorst Registered Users My HF Map location Join Date: Oct 2011	Have not got a manual, but I quess gov high is what you are aiming for... Flashing red, doesn't that indicate full throttle? __________________ Gaui X3 HW 50A V3 OMG H1/H2 Servo's BL450MX Mini-V (M.I.A.) Gaui X5 FES Polaris BEC BLS451/251 Silverline V-Bar Formula Swash/Head JR Forza 700 Scorp 160A opto + 4525 520 JR NX8925/SLG01 Vbar Neo JR XG14 PL8 v2

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-23-2015, 05:31 AM	#3 (permalink)
crazy3d Registered Users Thread Starter Join Date: Nov 2008	After my calculations i came to the conclusion that i should use gov low but i can be wrong. Ill try it in gov high and see what it does. I also dont think that i have reached full throttle at 48% as the manual states that gov activates at 60%.

Register Now

Log-in