Fun, Learning, Friendship and Mutual Respect
START  HERE

DJI Gaui Hyperion Batteries Empire Hobby

Unregistered
Go Back   HeliFreak > R/C Helicopter Support > MSH Protos > MSH Mini Protos


MSH Mini Protos MSH Mini Protos Helicopter Support Forum


Reply
 
Thread Tools Display Modes
Old 07-13-2012, 03:10 PM   #1
scott s
Registered Users
 

Join Date: Apr 2010
Location: malabar fl
Default bit the bullet and bought 2 1300mah 6s 65c thunderpower batts

got tired of not finding a single 6s lipo that needed to be put on its side with added protection or putting 2- 3s lipos in series and having to put them on their side with added protection. Hope I will be happy with the flight times. My plan is to mount them flush with the front on one of my stretched minis and if a bit more weight is needed I will put some great planes stick on lead weights at the very front top of the battery. I have done this on my 3 cell 450's. The weight neede at the very front is usualy minimal. 2 or 3 of the 7 gram stick ons i hope will do it. I just am not into hanging the battery of the front of the heli for obvious reasons HA!. If I can get 5 minute flights with them I will be happy as they are the perfect 6s fit for the mini imo. Ordered direct from tp. They are more than happy to make em up for ya as they should for what the damn things cost! I was going to wait for the reactors from rc canada but even those seem a bit to long but they are 1400 mah but way less c rating, oh well
scott s is online now        Reply With Quote
Old 07-13-2012, 04:19 PM   #2
Chris Nifty
Registered Users
 

Join Date: Dec 2011
Location: Australia
Default

I'll be interested to hear what you think of them Scott. I have a bunch of them and I'm happy with them but I thought my flight times might be longer than what I'm getting which is a max of about 5:20 sticking to the 80% rule, doing sport flying mainly about 2700 headspeed. I have my timer set at 5:10.
__________________
Mini Protos x 3
Warp 360 x 2
Goblin 500
Chris Nifty is offline        Reply With Quote
Old 07-13-2012, 04:54 PM   #3
vicrc
Registered Users
 
Posts: 2,190
 

Join Date: Jan 2008
Default

what would be the total weight of the pack?
__________________
Mini Protos BeastX
Trex 450 Pro BeastX
Protos 500... needs a Brain
n00b3D
vicrc is offline        Reply With Quote
Old 07-13-2012, 05:00 PM   #4
Chris Nifty
Registered Users
 

Join Date: Dec 2011
Location: Australia
Default

From memory I think they are 215 grams.
__________________
Mini Protos x 3
Warp 360 x 2
Goblin 500
Chris Nifty is offline        Reply With Quote
Old 07-13-2012, 05:09 PM   #5
vicrc
Registered Users
 
Posts: 2,190
 

Join Date: Jan 2008
Default

I am working on a 3s Protos because 4s and 6s is not that easy to find at the correct ma and weight. Putting together two 3s is not a bad idea its just all the wiring and connectors you will have to deal with.

Here is another source

http://www.valuehobby.com/power-syst...1-1v-lipo.html

which should go around the same weight as the pair you using. $20 a set basically
__________________
Mini Protos BeastX
Trex 450 Pro BeastX
Protos 500... needs a Brain
n00b3D
vicrc is offline        Reply With Quote
Old 07-13-2012, 06:37 PM   #6
Chris Nifty
Registered Users
 

Join Date: Dec 2011
Location: Australia
Default

Just weighed one with EC3 connector and full length velcro - comes in at 220 grams. I don't mind paying the price for quality and I don't miss the mucking around with series packs. Actually, I still sometimes use my 1100 Mah hyperions which go ok at just under 5 mins.
__________________
Mini Protos x 3
Warp 360 x 2
Goblin 500
Chris Nifty is offline        Reply With Quote
Old 07-13-2012, 10:28 PM   #7
rossk
Registered Users
 
Posts: 1,969
 

Join Date: Mar 2012
Location: Australia
Default

I have four of the TP 1300's, they go ok.
CG unstretched was perfect with pack in middle of tray
CG stretched I have the pack as forward as I dare and it still a little tail heavy.
Landing with around 25% left:
unstretched 2400rpm, hovering I can get 6min
unstretched 2700rpm, pushing I can get 5min
stretched 2600rpm, pushing I can get 4min
stretched 3000rpm, pushing I get 3min - they are barely warm!
__________________
Minicopter Diabolo - Kosmik 200 Cool, Pyro 800 Comp TT E820 - Kosmik 200, Scorp 5035
MA Whiplash - Kosmik 200, Pyro 700 TREX 700E - DFC Pro HV, Kosmik 200, 850MX
Protos 500 Stretch + Protos 500 + Protos Mini Stretch
MSH Brain Spektrum DX8
rossk is online now        Reply With Quote
Reply




Unregistered
Go Back   HeliFreak > R/C Helicopter Support > MSH Protos > MSH Mini Protos


MSH Mini Protos MSH Mini Protos Helicopter Support Forum

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


Copyright © 2004-2011 - William James - Helifreak.com