START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
MA Glow Miniature Aircraft Glow Helicopter Support Forum |
|
LinkBack | Thread Tools | Display Modes |
08-20-2006, 08:22 AM | #1 (permalink) |
Registered Users
Join Date: Nov 2004
|
Pro2K Parts
I have a 1999 Pro2K and looking for head axle # 0848-1. Rick's has informed that Min Air no longer has these axles available. Anyone have any laying around I could buy?
Frank Baity AMA 38026 |
Sponsored Links | |||
Advertisement |
|
08-20-2006, 08:51 AM | #2 (permalink) |
|
http://www.miniatureaircraftusa.com/...xt=0848-1&pg=1
As far as I know. MA still has those axles. That is the axle that fits the all metal 0848 rotor head. That head was on the SE also, so there is still a good number SE's out in the heli world flying. The only difference between the 120-5 Extreme axle and the 0848-1 axle. 0848-1 is about 4 mm longer than 120-5. I have an 0848-1 new in package. David |
08-20-2006, 09:26 AM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Nov 2004
|
David,
I talked with Ron several times trying to get a 0848-1 axle with no luck. Ron sent me a 120-5 Extreme unit which I don't see how it will work with the Pro metal blade grips that attach to the aluminum spacer between the radial bearings. I would be glad to take that 0848-1 antique off you hands should you want to part with it. Frank
__________________
Frank Baity AMA 38026 Turbine Waiver RW-545 FW-14690 Align 450 SE V-1 MA XL-Pro 2K Bergen Turbine X 2 |
08-20-2006, 10:35 AM | #4 (permalink) |
|
http://www4.mailordercentral.com/hel...?number=114055
Heliproz has the axle. If you don't want to get it from them. I will sell you the one I have. MTA hobbies also shows they have 08848-1 120-5 will not work with the metal blade grips. It is too short. David |
Thread Tools | |
Display Modes | |
|
|