START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
450 Aftermarket Upgrades 450 Aftermarket Upgrades |
|
LinkBack | Thread Tools | Display Modes |
10-09-2009, 10:35 PM | #1 (permalink) |
HF Support
|
RDLohr's TREX 450 Stronger Battery Mount
RDLohr’s Clearly Superior Products
TREX 450 Battery Mount This mount provides a strong flexible mounting surface for your battery. (Inspired by copterklutz) Mount in place of stock battery tray. Use stock screws to mount. Once you place Velcro on top for your battery it will raise the mounting surface to the height of the frame edges. Be very careful placing Velcro because it sticks very well to the Lexan! Note: Peel protective paper off all Lexan before use (if there is any) Note: Edges can be sanded with 220 grit sand paper if the fit is too tight or if there are rough edges or burrs. Note: Clean any machine oil off the screws before installation Note: For additional security, add a touch of CA when installing the screws (Optional) Good Luck and thanks, http://www.rdlohr.com/ Rick rlohr@nycap.rr.com or helifreak: rdlohr Copyright © 2006,2007,2008, 2009 RDLohr’s Clearly Superior Products. All rights reserved. http://www.readyheli.com/RDLohr_s_T_...tery_mount.htm
__________________
Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com Last edited by rdlohr; 02-03-2011 at 06:55 PM.. |
Sponsored Links | |||
Advertisement |
|
10-10-2009, 11:35 AM | #2 (permalink) |
Member
|
I'll look into ordering one of these next pay day.
__________________
):> |
10-10-2009, 02:02 PM | #3 (permalink) |
HF Support
Thread Starter
|
Cool! I think you'll like it. Simple but effective.
Rick
__________________
Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com |
10-20-2009, 05:22 PM | #4 (permalink) |
Member
|
Thanks for the battery mount, Rick!
I'd reply to the HF good trader list but I'm sure you're on there already.
__________________
):> |
10-20-2009, 06:05 PM | #5 (permalink) | |
HF Support
Thread Starter
|
Quote:
Let us know how it work out for you. Rick
__________________
Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com |
|
10-20-2009, 09:07 PM | #7 (permalink) | |
HF Support
Thread Starter
|
Quote:
Rick
__________________
Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com |
|
10-20-2009, 09:13 PM | #8 (permalink) |
Registered Users
|
That's nice. Stock is about 3.5g. I gouged out an aluminum one and it was almost 10g.
|
10-20-2009, 09:16 PM | #9 (permalink) | |
HF Support
Thread Starter
|
Quote:
Rick
__________________
Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com |
|
11-09-2009, 12:50 PM | #10 (permalink) |
Registered Users
|
My stock battery tray broke when I accidently dropped the helicopter. I was stupid and held it by the nose which with the Heli-Artist fuselage is a big fat no-no! The nose is only held on by magnets and for the instant I held it by the nose, the rear end dropped. Only damage was the battery tray.
So, I made a new one with a fiberglass sheet, and aluminum struts. WIll post a picture of it soon. Works better than the original, but does not look as clean. With the fuselage covering it, nobody will ever notice.
__________________
Blade 500x, 450x, 300x, 200srx, MCPX BL, DX7 Courtesy Clerk at Safeway, Lonetree! |
11-09-2009, 05:22 PM | #11 (permalink) | |
HF Support
Thread Starter
|
Quote:
Rick
__________________
Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com |
|
Thread Tools | |
Display Modes | |
|
|