START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
Synergy Model Helicopters Synergy Model Helicopters Support |
|
LinkBack | Thread Tools | Display Modes |
03-01-2012, 10:05 PM | #1 (permalink) |
Registered Users
Join Date: Apr 2010
|
Belt driven tail on E7
Pardon my stupidity, but I am new to 700 size helicopters. I have read here and on the Synergy threads on RR that many people are anxiously awaiting the TT conversion for the E7. I have a belt driven tail on my Furion6 and have had no issues. I have a TT driven tail on my trex 600N, also no issues.
Why are people displeased with a belt driven tail on a 700 class helicopter? Or is it particular to this helicopter? correct me if i am wrong but the Logo 600 SE, Compass 7HV, and the MC Diabolo are belt driven too. |
Sponsored Links | |||
Advertisement |
|
03-02-2012, 07:36 AM | #2 (permalink) |
Registered Users
|
There is nothing wrong with the belt. I am one the people awaiting a TT kit. I just prefer TT. I had a friend help me set the belt tension and now it is perfect. Prior to the e7 I had never flown a belt on a heli bigger than a 450. I was making the belt too tight.
Sent from my iPhone using Tapatalk
__________________
Synergy Factory Specialist / Rail Blades / Team Scorpion |
03-02-2012, 08:15 AM | #3 (permalink) |
Registered Users
Thread Starter
Join Date: Apr 2010
|
Thanks for the reply
|
03-12-2012, 09:53 PM | #4 (permalink) |
Registered Users
|
There are a few particular things about the belt drive setup on the E7 that don't make it ideal in my opinion.
First is the stock belt. I found it stretches too much under changing loads on the tail, creating too much slack on the non drive side of the system. Basically a situation where the belt touches itself in the middle of the boom where there is minimal clearance between the 2 sides. I had to run the stock belt WAY to tight to get the belt slap and ringing to stop. This putting way too much of a strain on tail case bearings, nevermind the belt itself. I had a few situations where the tail of the heli "Skipped" un expectedly and almost caused me to dump the heli. Not something I want to have happen again. This could be fixed in a couple ways. One would be to have a larger diameter boom, with a larger rear pulley, and slightly wider spacing on the front idler pulleys. Second is to put a polyurethane/kevlar belt on the heli that doesn't stretch as much. I've been using the Logo 600SE 770XL belt with much better success than stock. Much less drag in the system, and works a lot better. I see in another post the Synergy has their own kevlar belt on the way now as well. The belt system is identicle to a Logo setup, so it has been proven to work quite well. But on a 600SE you don't typically run a HS of 2200-2300 to compare results to. The Logo's also use a 25mm boom, and not a 22mm one like the Synergy's do. I doubt there's much of an issue if your have an E6, but with the longer distance from frame to tail with the E7, belt deflection does become something to consider.
__________________
|
03-12-2012, 10:16 PM | #5 (permalink) |
Registered Users
Thread Starter
Join Date: Apr 2010
|
Thank you Benny
|
03-19-2012, 03:00 PM | #6 (permalink) |
Registered Users
|
I can't say I'd recommend using the belt on an e7....mine just snapped in flight yesterday (just posted pics of carnage in main synergy forum - may repost/move to this forum if mods allow). I followed recommendation on correct belt tension - but to be honest I'm not sure if it was too tight, too loose, or if it just had too much stress on it - in order for it to rip in two.
__________________
Synergy e7, Vbar, HeliJive 120, Hacker 12L, JR 8917 HV, BLS251 Logo 400, Vbar, Jive 60+lv, S9650, BLS251, Pyro 600-09 TRex 450 Sport, MiniVbar, 5065MG, DS420, 450MX Last edited by vanillagorilla; 03-19-2012 at 04:08 PM.. |
03-19-2012, 03:48 PM | #7 (permalink) |
Registered Users
|
The belt definitely needs to be upgraded. Call fblrotors and talk to Ralph. I am running a Kevlar belt in my E7 that is 100% better. Tell him Matt told you to call.
It's not the Logo mod people have been using. |
04-08-2012, 12:03 PM | #8 (permalink) |
Registered Users
Join Date: Jul 2007
|
Can someone tell me where to buy this kevlar belt and what the belt spec is? I'm trying to replace a belt for an old Bergen Observer, who no longer sells the part. I need a belt that is XL pitch, 6 mm wide and about 1800 mm long. Thanks.
__________________
Pat L |
04-08-2012, 12:42 PM | #9 (permalink) | |
Registered Users
Join Date: Dec 2008
|
Quote:
http://www.readyheli.com/MIK4325-Dri...E_p_36871.html
__________________
CHP-DL 700e, Radikal G20 Always Vbar Last edited by greykat; 04-09-2012 at 08:16 AM.. |
|
04-08-2012, 01:20 PM | #10 (permalink) | |
Registered Users
|
Quote:
|
|
04-08-2012, 08:52 PM | #11 (permalink) |
Registered Users
Join Date: Jan 2010
Location: Massachusetts
|
Ralph gave me a kevlar belt to try and its great no slip or slap it dosent seem to stretch under load like the stock one I have about 50 flights on it so far.
|
04-09-2012, 07:22 AM | #12 (permalink) |
Registered Users
Join Date: Dec 2009
|
http://www.readyheli.com/MIK4325-Dri...E_p_36871.html
This is the one I ordered. Have not received it yet, so I'm not sure if it will work or not. The stock belt was disintegrating. The motor and pinion gear were full of particles from the stock belt after 12 flights. All rollers and such were/are free and smooth. Can't wait to replace the belt with a trusty TT. |
04-09-2012, 08:19 AM | #13 (permalink) |
Registered Users
Join Date: Dec 2008
|
oops, looks like I dumb thumbed my trackball. I have edited my post to show the correct belt link. I am using this belt, so far it works.
__________________
CHP-DL 700e, Radikal G20 Always Vbar |
Thread Tools | |
Display Modes | |
|
|