Outrage 550 Setups

[Daddyo79]

Lazor: I read lots of threads on servos and decided on these because of response time and price. I was planning on getting an external BEC anyway. I think having these servos just means I need one that can handle the power draw.

Is that what you're referring to?

[backburner1955]

Lazors comment is about it being WRONG to put Align parts on an Outrage... Like putting Chevy parts on a Ford.

[lazor 22]

I meant you don't have to have anything that says align on your heli lol. They are good servos but they are rebagged Savox. The Savox look cooler and you can probably find them cheaper (unless you buy the aligns used or something) and they have a better wire color IMO. Savox also makes Spektrums new servos, so there the same. (not the crappy clear ones).


In short Savox 1258TG are the ORIGINAL servos align and spektrum just rebranded them (align ds610, not sure The spektrum number) and 1290MG are the same as the ds650. Take a look at them if you havn't bought the aligns yet. I am using the 1258TG on cyclic.


And FYI, dodge>chevy>ford

[tptompkins]

Originally Posted by backburner1955

Lazors comment is about it being WRONG to put Align parts on an Outrage... Like putting Chevy parts on a Ford.

I completely read his post wrong. My bad. I thought he was referring to the brown out issue when using those servos. That's what I get for responding to a post at 3:20 am.

Tommy

[backburner1955]

Originally Posted by lazor 22

And FYI, dodge>chevy>ford

If you look at this post, you will see I agree...

https://www.helifreak.com/showpost.p...6&postcount=18

[Daddyo79]

ahhh!

Got it.

If the savox is the same as the align though (and the specs are almost exactly the same) does the savox also pull a lot of power for operation?

[lazor 22]

Yes, Savox makes them and sells them as there on, Align & Spektrum get them to make some with there cases on them and then they sell them at a slightly higher cost. (although you can find Aligns pretty cheap in the FS forum and if you use them for cyclic servos and you use the wheels you won't really see Align. But you will on the Tail servo,which is Blasphemy! Just kidding but look,


vs.


And


vs.

[tptompkins]

Sure they look the same, but how do you know that they are the exact same servo? Where are you getting your information?

Tommy

[lazor 22]

Oh no I meant look how cooler the Savox look.

But it is known information that Savox makes Align Servos and some of the Spektrum servos. Plus readyheli also states it in the information.
http://www.readyheli.com/SAVSC1258TG...o_p_37106.html
http://www.readyheli.com/SAVSH1290MG...o_p_37107.html

[tptompkins]

Cool...thanks for posting that. I've heard people say that these servos were the same before but I've never seen anything concrete (until now) that stated it.

Tommy

[lazor 22]

Yep,


So the point of my original post-

If you have yet to buy your servos, I would go for the Savox 1258TG on cyclic, and 1290MG on tail. They are the same as the Aligns, just have cooler looking cases (I have the 1258TG on my cyclics)

[lazor 22]

Ok I can't edit my original setup post, it has changed a tad though. Here is the final setup.


Motor: Castle Creations Vertigo 3434-1100
ESC: Castle Creations ICE 100 w/ Castle Quick Link
BEC: Western Robotics Super Mini
Cyclic Servos: Savox 1258TG
Tail Servo: MKS BLS980
Gyro/FBL Unit: Skookum SK-720
Lipos: XPS Platnium Plus 65C 6S 5000mah
Pinion: 16T Revco Hard One
Main Blades: Outrage CF 550mm
Tail Blades: KBDD Orange 92mm Tail blades
Rx: 2 JR remote rx's
Connectors: Deans

"upgrades"
Quick UK rocket links all over
Fusuno Hi-Vis Orange Fins

[nTn]

Motor: Neu 1910-H 680KV
ESC: HobbyWing Platinum 70HV
BEC: Align 6A
Cyclic Servos: Inolab 751MG
Tail Servo: MKS BLS980
Gyro/FBL Unit: MiniVbar 5.0 Express
Lipos: Turnigy 10S 3600mAh 30C
Pinion: 14T
Main Blades: Outrage CF 550mm
Tail Blades: TIG 95mm
Rx: MiniVbar with 1 satellite
Connectors: XT-60

The power is awesome. Now I will change the main gear for Fusion main gear mod 0.8. Very nice

Thanks