NEW GOBLIN 500 SPORT PROBLEM WITH THE ONE WAY BEARING????

[Acid Junkie]

Hello guys...yesterday i just started to build my fist time builg goblin cause till now i had only Aligns...anyway after reading and watching carefully some videos on youtube i started....everything ok i went their way...a little bit more locktite than i did till now...and a little more tighten the screws ...before i just screw until the part touch the screwed part..anyway....i m to the point i assembled the up part...with the gears main shafts and servos positions...and the main frame....i stopped there..! today i noticed something strange for me....i have the head on the main shaft with the swashplate and everything....and i have stopped to the point i screw the main pulley and tail pulley..... and here is the weird thing....i go and turn the main shaft clockwise like the blades should rotate....and i notice that if i hold the main pulley where the belts goes on with the motor pulley i can stop it...and still rotate the main shaft clockwise.....it looks like the one way bearing locks the gear reverse....but the one way bearing is factory assembled and i checked more than 5 times if i have put the pulley up side down..but no...i did it like the manual and the videos shows.....is that normal???????? the motor could rotate all its rpm and if i hold the head of the main shaft i cant stop it and the motor will just rotate the pulley....i m 100% positive that i did exactly what the manual and videos says......anyone with goblin can help me please asap before i go farther?cause if this is wrong i dont want to remove parts in a brand new heli etc etc...i must solve this now before i complete the build....any help would be apreciated...i repeat.....i turn the main shaft clockwise ...and if i want i hold the main pulley with my hand and it stops...like it locks reverse..unless there is normal thing and miss something......thanks in advance if anyone helps....i would post a pic to which part i mean exactly but i dont see to be any option to upload photos in here...