Spectrum Module and Jeti DS16

[Steve51]

has anyone come up with a way to use a Spektrum transmitter module with the Jeti DS16? It would be good to be able to keep using some small bind and fly indoor stuff with this transmitter.

I have tried using the PPM output from a 9 channel receiver but no success with that the signal might not be strong enough to pass through to the module.

[-רחל]

I use a Orange Module for JR and a RSAT2.
Works like a charm with my Nano CPX and Nano CPX Brushless.

While setting the whole thing up I stumbled across the Jetibox emulator of my DC-16 for switching the PPM between positiv and negativ.

Maybe I accidently did the right thing (or maybe I changed nothing...) nevertheless it works.

Just one question to make a long story short - how can I alter the PPM from + to - and backwards via the Jetibox emulator?

I've pressed a lot of arrows but quiet didn't know where I was and what I was doing

[gelatmi1]

Originally Posted by Steve51

has anyone come up with a way to use a Spektrum transmitter module with the Jeti DS16? It would be good to be able to keep using some small bind and fly indoor stuff with this transmitter.

I have tried using the PPM output from a 9 channel receiver but no success with that the signal might not be strong enough to pass through to the module.

See here:

https://www.helifreak.com/showthread.php?t=539600

[gelatmi1]

Originally Posted by -רחל

I use a Orange Module for JR and a RSAT2.
Works like a charm with my Nano CPX and Nano CPX Brushless.

While setting the whole thing up I stumbled across the Jetibox emulator of my DC-16 for switching the PPM between positiv and negativ.

Maybe I accidently did the right thing (or maybe I changed nothing...) nevertheless it works.

Just one question to make a long story short - how can I alter the PPM from + to - and backwards via the Jetibox emulator?

I've pressed a lot of arrows but quiet didn't know where I was and what I was doing

Use Device Explorer...it's very easy !!!!

[-רחל]

Originally Posted by -רחל

how can I alter the PPM from + to - and backwards via the Jetibox emulator?

Nobody ever tried?

[Puttputt maru]

This is the flow chart of the Rsat2. you should find, I think, the menu you are looking for switching under the PPM output mode menu

[-רחל]

Thanks for assistance. Yesterday I've accidently set the RSAT2 to clone mode.
Took some time to find out how to reverse that sheet, as in clone mode the RSAT2 plays dead. It totally refuses to send data. No comunication possible. Absolutely dead. I realy hate the JB!