Xnova 4030 470kv logo 600

[tacomaster]

Just aquired this motor and a jive 120 esc for a new logo 600. I've never flown a logo but is this size motor required to hold 2200 head speed?

I've got a HW 100 v3 and a quantum 4135 560kv out of an old goblin 570 build I could use instead and save about 200g lol. Seems this motor is over kill to me. I didn't even run a motor this big in my whiplash 700 at 2200 rpm.

Thanks guys

[Brute71]

Quantum 4135 has 25mm bolt spacing so wont work with the logo motor mount or counter bearing. It is a pretty potent motor though, ran one in my Trex 600esp @ 2300rpm and 15* of pitch. Just throw the xnova in it and enjoy.

[GimpyGolden]

Pyro 700 is a 4030 motor and is/was kit combo choice.
That or a slightly larger Scorpion 4035.
It'll be a good motor for you assuming you have the bolt pattern to match your mount.

L6003D = 25x3mm
L600Sx = 30x4mm

[aziz76]

Originally Posted by GimpyGolden

Pyro 700 is a 4030 motor and is/was kit combo choice.
That or a slightly larger Scorpion 4035.

Pyro 700 is actually a 3930 stator. But you are correct that it was offered as part of the combo and it's a great motor for the Logo 600. Great power and light weight.

[seefest]

Originally Posted by tacomaster

Just aquired this motor and a jive 120 esc for a new logo 600. I've never flown a logo but is this size motor required to hold 2200 head speed?

I've got a HW 100 v3 and a quantum 4135 560kv out of an old goblin 570 build I could use instead and save about 200g lol. Seems this motor is over kill to me. I didn't even run a motor this big in my whiplash 700 at 2200 rpm.

Thanks guys

I'm running the 4030-470 motor and Jive 120 in my 600SX. I run 2200 hs and 12 dgrees pitch. I don't feel it's overpowered at all. In fact I think it could use a bit more!
You will be happy with performance.