Availability in Europe

[ElektroTrainerS]

Hi,
I´m wondering about the fact the 695´s are nowhere available in Germany. Official German Distributor woh world-of-heli lists Status "im Zulauf" (means: delivery expected), rcheli-store has Status "zur Zeit nicht lieferbar" (not available). 1st pair I´ve purchased used, second (after a Crash caused by a loosen tail slider) was ordered on rcheli-store. I´m just wondering due to the fact of a strong Euro, this makes the blades cheaper in Europe or am I wrong?

[Aryemis]

I'd be interested in the availability in Europe as well.
Though I doubt we'll ever get lower prices here, due to the automatic +20% VAT we get over the US prices (and the difference is usually more than 20% too).

[Matt Nasca]

Check out Cyclones find a dealer page. Midland carries them as does a German site.

http://www.cyclone-blades.com/p/find-a-dealer

[Specter_03]

Hello,
If ever available here

http://www.rcoutlet.ch/webshop/suche...&BTN_suchen=OK

[Varelco]

European stockists seem inconsistent for these blades. I got my 695s when they were originally released from Fast lads in the UK. Shortly after they stopped stocking them and the only place I could find then was from Rigidheli in the Netherlands. It seems Rigidheli also no longer stock Cyclone blades either. Now Midland Helicopters in the UK has the full range in their store. I seem to be chasing them around.

[ElektroTrainerS]

Short feedback from my side: availability of Cyclone main and tail blades is very good now (offered by different shops in Germany), last weeks purchase: 115 tails, seems like they are fuel savers (and whisperers), flight time's ~ 1 minute longer than with my (strong & well performing) Edge SE's (same size).

[Constant]

rcoutlet in Swiss is selling the 695mm for $ 126,60. Only problem: they don't take any orders from outside Swiss