Register Now

450promaui · 04-12-2011, 08:09 PM

just was wondering if anyone had used this rx in a 700e fbl's. what will i need now that i got this other than a batt? using a bls 451 servo and mks bls980. going to use a vbar pro 5.1 as soon as i get the funding. any help will be nice. thanks!

Mahalo,
Ryan

backburner1955 · 04-12-2011, 09:49 PM

Depends on the voltage you want to run on your servos, I dont want to run 5.4V or full 8.4V from the pack, so I got a Perfect regulators Spekline regulator that is adjustable from 6V to 6.5V. that way I can run 6.5V on the whole system.

http://www.perfectregulators.com/ind...&product_id=66

450promaui · 04-13-2011, 01:21 PM

6.5 would be nice. the part that im wondering is if i need a regulator for every servo? trying to keep the weight down and simple. is that the only way do drop down the voltage? Thanks pal!

backburner1955 · 04-13-2011, 02:51 PM

You use the Spekline regulator on the battery side of the receiver then use the unregulated ports on the receiver.

450promaui · 04-14-2011, 06:27 PM

Yes sir cant wait! its all cake now! thanks alot!

450promaui · 05-11-2011, 05:42 PM

well it seems that my plan is out the window considering that i have vbar and i dident know i dident need a rx as for the vbar will handle that part...so what now? any good regs out there that will fit my need?

04-12-2011, 08:09 PM	#1 (permalink)
450promaui Registered Users Join Date: Jun 2010	ar7110 in 700e. what now? just was wondering if anyone had used this rx in a 700e fbl's. what will i need now that i got this other than a batt? using a bls 451 servo and mks bls980. going to use a vbar pro 5.1 as soon as i get the funding. any help will be nice. thanks! Mahalo, Ryan

04-12-2011, 09:49 PM	#2 (permalink)
backburner1955 Registered Users Join Date: Mar 2010	Depends on the voltage you want to run on your servos, I dont want to run 5.4V or full 8.4V from the pack, so I got a Perfect regulators Spekline regulator that is adjustable from 6V to 6.5V. that way I can run 6.5V on the whole system. http://www.perfectregulators.com/ind...&product_id=66 __________________ *Bryan* AMA# 982814 *"No-Neck R/C"*

04-13-2011, 01:21 PM	#3 (permalink)
450promaui Registered Users Thread Starter Join Date: Jun 2010	6.5 would be nice. the part that im wondering is if i need a regulator for every servo? trying to keep the weight down and simple. is that the only way do drop down the voltage? Thanks pal! Last edited by 450promaui; 04-13-2011 at 01:25 PM.. Reason: did not see link!

04-13-2011, 02:51 PM	#4 (permalink)
backburner1955 Registered Users Join Date: Mar 2010	You use the Spekline regulator on the battery side of the receiver then use the unregulated ports on the receiver. __________________ *Bryan* AMA# 982814 *"No-Neck R/C"*

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-14-2011, 06:27 PM	#5 (permalink)
450promaui Registered Users Thread Starter Join Date: Jun 2010	Yes sir cant wait! its all cake now! thanks alot!

05-11-2011, 05:42 PM	#6 (permalink)
450promaui Registered Users Thread Starter Join Date: Jun 2010	well it seems that my plan is out the window considering that i have vbar and i dident know i dident need a rx as for the vbar will handle that part...so what now? any good regs out there that will fit my need?

Register Now

Log-in