CC Phoenix Edge Lite 50 and Jeti DS 14

[kumoro]

Hi all,
Been searching for the problem I have thru this forum, but now of the solutions here make me a success in throttle calibration.
What I have done
1. Put my max positive to 30% and Max Negative to -30%
2. Put throttle to maximum position (top)
3. Connect battery to the esc
4. Adjust max positive from 30% up until beep sound. It was beeping at 102%. Added 2 more clicks so max positive is 104%
5. Lower throttle to the minimum position (bottom)
6. Adjust max negative from -30% down until beep sound. Nothing happen, even Max negative is -150%.
The weird thing is, when in the max negative, the LED blink bright from -30% up to -71%, but when it passed -71% (say -72%) LED become dimmed but still blinking.
This esc was in TRex 450L Dominator before with futaba radio. It was perfectly fine.
Any idea where did I miss??please help.
Thank you.

[Xrayted]

Are you doing the throttle calibration using a flight mode with a linear 0,25,50,75,100 throttle curve, and is TH turned off?

[kumoro]

Hi,
Yes. Doing with linear throttle curve (0,25,50,75,100) and TH off.
Thank you.