START HERE |
|
Register | FAQ | PM | Events | Groups | Blogs | Calendar | Mark Forums Read |
Unregistered
|
mCP X Blade Micro CPx Helicopters Information and Help |
|
LinkBack | Thread Tools | Display Modes |
04-16-2012, 06:44 AM | #1 (permalink) |
Registered Users
Join Date: Dec 2011
|
pitch servo problem
I had a small crash earlier, nothing much and not bad enough to break anything or so i thought.
My pitch servo now stays at max lift, if i unplug the battery and wind it back down as soon as i plug in the battery it just goes straight back to max pitch. I have taken it apart and cleaned the strip and fingers etc and it made no difference, is my servo shot or is there something else i should be looking at. |
Sponsored Links | |||
Advertisement |
|
04-16-2012, 07:00 AM | #2 (permalink) |
Registered Users
Join Date: Mar 2011
|
could be a dirty set of contacts , a broken connection , or a bad FET , here is a link to a thread that covers a similar problem
https://www.helifreak.com/showthread...ight=servo+fet |
04-16-2012, 07:00 AM | #3 (permalink) | |
Registered Users
Join Date: Mar 2011
|
Quote:
__________________
Team Newb pilot All my helis and quads were lost in a tragic boating accident. |
|
04-17-2012, 08:54 AM | #4 (permalink) |
Registered Users
|
Mine did that this last weekend, it ended up being a new servo!
$20 bucks at the LHS.
__________________
mCPx, HK 450 SeV2, HK 250 GT, Blade SR, Walkera 4#, Syma S107, DX6i. 200QX, SYMA Chrwing X8W |
04-17-2012, 09:43 AM | #5 (permalink) |
Registered Users
Thread Starter
Join Date: Dec 2011
|
Definately the servo, tried resoldering the wires but no different so looks like i had better get a new one.
|
04-17-2012, 10:13 AM | #6 (permalink) |
Registered Users
Join Date: Feb 2012
|
Before you toss your $ at it, I would connect one of the other servos to the troubled ones original position on the 3in1, just to rule out a fault on the 3in1.
__________________
"I do all my own stunts"... and repairs Heli - mCPX - v2 TX - DX6i |
Thread Tools | |
Display Modes | |
|
|