Register Now

rdlohr · 11-30-2006, 10:55 AM

spork: This is a great service! Thanks for giving your time to do this!
microman: Thanks for your support!
finless: Thanks for hosting it!

spork · 11-30-2006, 11:46 AM

It looks like Bob posted the updates - Thanks Bob! I just sent him another update with a bunch more parts (both Align and aftermarket).

Rick, I haven't put your parts in yet, but they're next.

I don't think I have any hyperion blades yet. Anyone know the source for them?

Pinecone · 11-30-2006, 06:35 PM

Here is another upgrade screw set:

http://modefosheli.com/trex_upgrade_screw_kits

I got this one and they gave lots of extras.

spork · 11-30-2006, 07:44 PM

Quote:

Originally Posted by Pinecone

Here is another upgrade screw set:

http://modefosheli.com/trex_upgrade_screw_kits

I got this one and they gave lots of extras.

Thanks. I'll add it tonight.

gagi · 11-30-2006, 08:17 PM

Great job!

Now only if align or someone sold the new tail hubs seperatley.

-Gagi

spork · 12-01-2006, 03:32 AM

Quote:

Originally Posted by gagi

Great job!

Now only if align or someone sold the new tail hubs seperatley.

Thanks. That's kind of why I started it. I didn't know what parts you could get separately, what parts came with what... I find myself searching all over the place (and usually asking here) for the part I need. I hope to collect all the various parts in one place - with hopefully a bit better organization than I see on many sites.

I've been pointed to a bunch more parts tonight. I already have another page update to send Bob, and when I get the latest parts in I'll have yet another. Hopefully it's starting to settle out.

No_Gassers_Here · 12-03-2006, 05:07 PM

hey Sfork I've got a non-related parts ? I seen on your site under
http://www.wavelandps.com/spork/misc.htm
about 3/4 the way down there is a pic of a giro mount that pic has some kinda mire loop on the servo wire where the H...E...double kockey sticks do I get some of that. It just trims the heli out really nice and clea. can you help?

spork · 12-03-2006, 05:28 PM

Good question. I would bet that DigiKey has that stuff. Lots of people here use it. So you'll probably get a better answer. If not, check with rdlohr. I'm guessing that's his machine.

No_Gassers_Here · 12-03-2006, 05:36 PM

Thank you I'm going to stop building intell I can get some and when I find where to get it on the net I will let you know everyone should run with it (clean look,wires kept contained, did I say clean look yet?) thanks again :glasses2:

Pinecone · 12-03-2006, 05:40 PM

The wire cover? Ready Heli has it.

1/2" - http://www.readyheli.com/New_Servo_W...leeving_xl.htm

1/4" - http://www.readyheli.com/New_Servo_W...ving_large.htm

1/8" - http://www.readyheli.com/New_Servo_W...eeve_small.htm

No_Gassers_Here · 12-03-2006, 05:45 PM

Thank you buddy.

spork · 12-03-2006, 07:51 PM

I'll post it on the site under the Misc. heading. Personally, I prefer to keep the heli as light as possible. So I just use the minimum number of cable-ties.

Jermo · 12-03-2006, 08:20 PM

very nice!! if you ever decide to take this down holler because I'd like to have it. Do you use a database on the back end to hold the data or is it all static? (DOH! I guess I could "view source" and see..

)
Jermo

spork · 12-03-2006, 08:34 PM

I just type the html in by hand. That's how us luddites roll.

I've added the sleeving link. I'll probably ask Bob to post site updates tomorrow.

No_Gassers_Here · 12-03-2006, 10:40 PM

thank you sfork

kgfly · 12-04-2006, 03:08 AM

Quote:

sfork

Is this a private joke or do you have a problem with the 'p' on your keyboard ?

spork · 12-04-2006, 03:35 AM

Quote:

Originally Posted by kgfly

Quote:

sfork

Is this a private joke or do you have a problem with the 'p' on your keyboard ?

Hey, as long as he doesn't call me a foon! :mrgreen:

No_Gassers_Here · 12-04-2006, 10:55 AM

LOL nope just a probem with the p on the key board on the otrhe computer. I'm lazy and don't waht to climb under the desk to plug in the new one I'll do it tonight sorry if I offended anyone....

spork · 12-04-2006, 10:57 AM

Quote:

Originally Posted by No_Gassers_Here

sorry if I offended anyone....

Not me.

kgfly · 12-04-2006, 02:24 PM

Just kidding around NGH

11-30-2006, 10:55 AM	#21 (permalink)
rdlohr HF Support My HF Map location Join Date: May 2006	spork: This is a great service! Thanks for giving your time to do this! microman: Thanks for your support! finless: Thanks for hosting it! __________________ Helifreak, the place to be! Oxy5 w/Brain2, Rush 750 w/VBAR,Logo 400SE, 600SE w/NEOs, TREX 450SE, 500, 600, Blade mCPX,130X, 180CFX, Nano QX, Convergence VTOL, MiniProtos w/BD3SX My products, used by top pilots worldwide, like you! http://rdlohr.com

11-30-2006, 11:46 AM	#22 (permalink)
spork Registered Users Thread Starter My HF Map location Join Date: Sep 2005	It looks like Bob posted the updates - Thanks Bob! I just sent him another update with a bunch more parts (both Align and aftermarket). Rick, I haven't put your parts in yet, but they're next. I don't think I have any hyperion blades yet. Anyone know the source for them? __________________ Nothing is ever as good or as bad as it seems.

11-30-2006, 06:35 PM	#23 (permalink)
Pinecone Registered Users Join Date: Sep 2006	Here is another upgrade screw set: http://modefosheli.com/trex_upgrade_screw_kits I got this one and they gave lots of extras. __________________ Terry AMA#47402, IRCHA # 3395 Blade CP "Pro", Trex 450SE, PiccoZ, Quick of Japan EP8v2 EX, Hurricane 550, Hurricane 200, JR Vibe 50, Blade mCX, Bergen Intrepid Gasser, Pantera 50, Blade mSR, Novus CP

12-03-2006, 05:07 PM	#27 (permalink)
No_Gassers_Here Registered Users My HF Map location Join Date: Nov 2006	hey Sfork I've got a non-related parts ? I seen on your site under http://www.wavelandps.com/spork/misc.htm about 3/4 the way down there is a pic of a giro mount that pic has some kinda mire loop on the servo wire where the H...E...double kockey sticks do I get some of that. It just trims the heli out really nice and clea. can you help? __________________ The ground is only one dumb thumb away!!! Trex 600CF Silver,401/9253,60XL/75amp,all the metal bling bling 250v1 410's(5065mg's when I get a minute),750g,5084mg, hyperion battery( currently my favorite heli) 450SE V2 NUE 1107/2/H/2.3, CC45apm esc,770 3D/3400g,65mg,V_Blades,4s 21ooma Hyperions

12-03-2006, 05:28 PM	#28 (permalink)
spork Registered Users Thread Starter My HF Map location Join Date: Sep 2005	Good question. I would bet that DigiKey has that stuff. Lots of people here use it. So you'll probably get a better answer. If not, check with rdlohr. I'm guessing that's his machine. __________________ Nothing is ever as good or as bad as it seems.

11-30-2006, 08:17 PM	#25 (permalink)
gagi Join Date: Jul 2006	Great job! Now only if align or someone sold the new tail hubs seperatley. -Gagi

12-03-2006, 05:36 PM	#29 (permalink)
No_Gassers_Here Registered Users My HF Map location Join Date: Nov 2006	Thank you I'm going to stop building intell I can get some and when I find where to get it on the net I will let you know everyone should run with it (clean look,wires kept contained, did I say clean look yet?) thanks again :glasses2: __________________ The ground is only one dumb thumb away!!! Trex 600CF Silver,401/9253,60XL/75amp,all the metal bling bling 250v1 410's(5065mg's when I get a minute),750g,5084mg, hyperion battery( currently my favorite heli) 450SE V2 NUE 1107/2/H/2.3, CC45apm esc,770 3D/3400g,65mg,V_Blades,4s 21ooma Hyperions

12-03-2006, 05:40 PM	#30 (permalink)
Pinecone Registered Users Join Date: Sep 2006	The wire cover? Ready Heli has it. 1/2" - http://www.readyheli.com/New_Servo_W...leeving_xl.htm 1/4" - http://www.readyheli.com/New_Servo_W...ving_large.htm 1/8" - http://www.readyheli.com/New_Servo_W...eeve_small.htm __________________ Terry AMA#47402, IRCHA # 3395 Blade CP "Pro", Trex 450SE, PiccoZ, Quick of Japan EP8v2 EX, Hurricane 550, Hurricane 200, JR Vibe 50, Blade mCX, Bergen Intrepid Gasser, Pantera 50, Blade mSR, Novus CP

12-03-2006, 05:45 PM	#31 (permalink)
No_Gassers_Here Registered Users My HF Map location Join Date: Nov 2006	Thank you buddy. __________________ The ground is only one dumb thumb away!!! Trex 600CF Silver,401/9253,60XL/75amp,all the metal bling bling 250v1 410's(5065mg's when I get a minute),750g,5084mg, hyperion battery( currently my favorite heli) 450SE V2 NUE 1107/2/H/2.3, CC45apm esc,770 3D/3400g,65mg,V_Blades,4s 21ooma Hyperions

12-03-2006, 07:51 PM	#32 (permalink)
spork Registered Users Thread Starter My HF Map location Join Date: Sep 2005	I'll post it on the site under the Misc. heading. Personally, I prefer to keep the heli as light as possible. So I just use the minimum number of cable-ties. __________________ Nothing is ever as good or as bad as it seems.

12-03-2006, 08:20 PM	#33 (permalink)
Jermo Registered Users Join Date: Nov 2006	very nice!! if you ever decide to take this down holler because I'd like to have it. Do you use a database on the back end to hold the data or is it all static? (DOH! I guess I could "view source" and see.. ) Jermo __________________ Jerry Moore, AMA #878954,TARANIS OpenTX- Pantera 600 FB - Pantera .60 FB - Takes a licking and keeps on kicking! KISSAM = Keep It Simple Stupid: Affordable, Maintainable - Visit Early and often - http://open-txu.org

12-03-2006, 08:34 PM	#34 (permalink)
spork Registered Users Thread Starter My HF Map location Join Date: Sep 2005	I just type the html in by hand. That's how us luddites roll. I've added the sleeving link. I'll probably ask Bob to post site updates tomorrow. __________________ Nothing is ever as good or as bad as it seems.

12-03-2006, 10:40 PM	#35 (permalink)
No_Gassers_Here Registered Users My HF Map location Join Date: Nov 2006	thank you sfork __________________ The ground is only one dumb thumb away!!! Trex 600CF Silver,401/9253,60XL/75amp,all the metal bling bling 250v1 410's(5065mg's when I get a minute),750g,5084mg, hyperion battery( currently my favorite heli) 450SE V2 NUE 1107/2/H/2.3, CC45apm esc,770 3D/3400g,65mg,V_Blades,4s 21ooma Hyperions

12-04-2006, 10:55 AM	#38 (permalink)
No_Gassers_Here Registered Users My HF Map location Join Date: Nov 2006	LOL nope just a probem with the p on the key board on the otrhe computer. I'm lazy and don't waht to climb under the desk to plug in the new one I'll do it tonight sorry if I offended anyone.... __________________ The ground is only one dumb thumb away!!! Trex 600CF Silver,401/9253,60XL/75amp,all the metal bling bling 250v1 410's(5065mg's when I get a minute),750g,5084mg, hyperion battery( currently my favorite heli) 450SE V2 NUE 1107/2/H/2.3, CC45apm esc,770 3D/3400g,65mg,V_Blades,4s 21ooma Hyperions

12-04-2006, 02:24 PM	#40 (permalink)
kgfly HF Support My HF Map location Join Date: Jun 2006	Just kidding around NGH __________________ Kenneth * MSH Protos Stock motor/15t/Align75/Align DS510/GL730+DS520/7s A123 2300 * TRex450CF/430L/12t/CC45/HS65mg/L2100T/KP 3s 2200 25C or 4S LiFe Previous rides: HX242, W5-4, TRex450(HDE), TRex450(SE), QJ-EP8v2, BCX2 ,Logo10, Hurricane550 SIM: Phoenix (previously also Reflex/XTR, ClearView, RF, FMS)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Register Now

Log-in